Table of Contents
Advertisement
Mounting
the Dryer to the Washer
(continued)
5. Carefully
remove the hole plugs located in the
bottom of the dryer front panel.
6. Remove the four (4) legs from the dryer base.
7. Place the dryer on top of the washer.
Slide
back into the rear brackets
(7A) then drop the
front down behind the front brackets (7B).
8. Insert the two (2) long screws, provided
in the
kit, through the holes in the dryer front panel
and install into the front mounting
brackets.
9. Install the hole plugs removed
in step 5.
10. Refer to the washer
and dryer installation
instructions
for proper installation
and function.
11. Save the top panel and brackets in the case of
future side by side use.
/
/
©
/
@
@
Numbers
correspond
to steps.
12
Advertisement
Table of Contents
