GE P2B940DEH1WW Owner's Manual page 31

Hide thumbs Also See for P2B940DEH1WW:
Table of Contents

Advertisement

Available languages

Available languages

Troubleshooting
tips ... Before you call for service
Possible
Cause
What
To Do
Oven light does not
Light bulb is loose or defective.
Tighten or replace bulb.
work
Pad operating light is broken.
Call for service.
Oven will not self-clean
The temperature
is too high to set a
Allow the oven to cool and reset the controls.
self-clean operation.
Oven controls improperly set.
See the Cleaning the Oven section.
Excessive smoking
Excessive soil or grease.
Press the Cancel/Off pad. Open the windows to rid the
during clean cycle
room of smoke. Wait until the LOCKED light goes off.
Wipe up the excess soil and reset the clean cycle.
Lower the rack position of the food.
Excessive smoking
during broiling
Oven door will not open
after a clean cycle
Oven not clean after a
clean cycle
Food too close to burner element.
Oven too hot.
Oven controls improperly set.
Oven was heavily soiled.
Allow the oven to cool below locking temperature.
See the Cleaning the Oven section.
Clean up heavy spitlovers before starting the clean
cycle. Heavily soiled ovens may need to self-clean
again or for a longer period of time.
"DOOR
"
I_ flashes m the
The self=clean
cycle has been
Close the oven door.
display
selected
but the door is not closed.
-LOCKED
light is on
The oven door is locked because
Press the Cancel/Off pad. Allow the oven to cool.
when you want to cook
the temperature
inside the oven
has not dropped below the locking
temperature.
"F--
and a number
You have a function
error code.
or letter" flash in the
If the function
code repeats.
Display goes blank
A fuse in your home may be blown
or the circuit breaker tripped.
The clock is turned off.
See the Special features section.
Oven is in Sabbath Mode.
Verify that the oven is not in Sabbath Mode.
See the Special Features section.
Power outage, clock
Power outage or surge
Reset the clock. If the oven was in use, you must reset
flashes
it by pressing the Cancel/Off pad, setting the clock and
resetting any cooking function.
"Burning"
or "oily"
odor
This is normal in a new oven and
To speed the process, set a self-clean cycle for a
emitting
from the vent
will disappear in time.
strong odor
My oven door glass
appears to be ,tinted,
or have a ,rainbow,
color, is this defective?
cool while baking.
"Shut Door, flashes
in
The oven door has been left open
the display
Cooking
mode shuts off
Door left open after "Shut
Door"
when door left open
flashed
in display.
An odor from the oven insulation
is normal for the first few times the
oven is used.
No. The inner oven glass is coated
with a heat barrier to reflect the
heat back into the oven to prevent
heat loss and keep the outer door
Press the Cancel/Off pad. Allow the oven to cool for
one hour. Put the oven back into operation.
Disconnect all power to the oven for at least 30 seconds
and then reconnect power. If the function error code
repeats, call for service.
Replace the fuse or reset the circuit breaker.
minimum of 3 hours. See the Cleaning the Oven
section. This is temporary.
This is temporary and will go away after several uses or
a self-clean cycle.
This is normal. Under certain light or angles, you may
see this tint or rainbow color.
Close door and normal mode will resume
Close door and normal mode will resume
--4
©
C
t==.
t=t3
¢/3
I
©
©
-4
m
Z
©
-4
m
=t3
¢/3

Advertisement

Chapters

Table of Contents
loading

Table of Contents