Opening And Closing Doors; Using The Controls; Viewing Andadjusting; Use - Maytag MFT2776DEH00 Use And Care Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

REFRIGERATOR
USE
Opening
and Closing
Doors
There are two refrigerator compartment
doors. The doors can be
opened and closed either separately or together.
There is a vertically-hinged
seal on the left refrigerator door.
When the left side door is opened, the hinged seal
automatically
folds inward so that it is out of the way.
When both doors are closed, the hinged seal automatically
forms a seal between the two doors.
A. Hinged seal
Using the Controls
The controls are located above the external dispenser.
IMPORTANT:
Depending on your model you may have Style 1 or Style 2
controls. Please follow the instructions
specific to your
model.
Style 1 controls are shown in the following graphics except
where indicated.
The control panel display will turn off automatically and enter
"sleep" mode when the control buttons and dispenser pads
have not been used for 2 minutes or more. Press any control
to reactivate the display screen.
Style 1
Style 2
Viewing
and Adjusting
Temperature
Set Points
For your convenience, your refrigerator and freezer temperature
controls are set to the recommended
set points at the factory.
When you first install your refrigerator, make sure the temperature
controls are still set to the recommended
set points. The
recommended
set points are 37°F (3°C) for the refrigerator and
0°F (-18°C) for the freezer.
IMPORTANT:
Wait 24 hours before you put food into the refrigerator. If you
add food before the refrigerator has cooled completely, your
food may spoil.
NOTE: Adjusting the set points to a colder than
recommended
setting will not cool the compartments
any
faster.
If the temperature is too warm or too cold in the refrigerator or
freezer, first check the air vents to be sure they are not
blocked before adjusting the controls.
18

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mft2776dem00Mft2776dee00

Table of Contents