Advertisement
Amana Product Information by Fax / Internet
800-843-0304 / http://www.amana.com
Cutout Dimensions
for Counter
Installation
29 3/8"
20 s/8"
28 _/8"
Minimum
Clearances
to Combustible
Surfaces
The dimensions provided are to be
measured from the cooktop itself, and not
the installation cutout for the cooktop.
A--30 inches minimum clearance between the
top of the cooking surface and the bottom
of an unprotected wood or metal cabinet.
OR
A--24 inches minimum clearance when bottom
of wood or metal cabinet is protected by not
less than 1/4-inch thick flame retardant
millboard covered with not less than No.28
MSG sheet steel, 0.015 inch thick
stainless steel, 0.024-inch thick aluminum,
or 0.020 inch thick copper.
B--0 inches minimum distance between
cooktop and wall, cabinet taller than 36
inches or a walkway.
C_0 inches minimum distance between
cooktop and back wall or backguard.
D--2 inches minimum distance between
cooktop and edge of countertop.
E--Minimum
of 18 inches (on each side)
between top of countertop and bottom of an
unprotected wood or metal cabinet.
F--Minimum
of 30 inches (30-inch cooktop)
length for protected cabinets above the
cooktop.
t
C
.. ......
Amana's ongoing commitment to quality products may mean a change in product specifications without notice.
Doc. 3060, Page 2 of 4
Advertisement
