Using The Device Manager Main Window - eInstruction InterwriteMobi Learner Getting Started

Interwrite Mobi™
12

Using the Device Manager Main Window

Once Device Manager is selected from the menu, the Device Manager
main window opens. From this window, you can connect devices, view
properties, set preferences, identify connected devices, lock or unlock tab-
lets, and perform other management functions.
The following table identifies the icons associated with the Device Manager
main window.
Icon Name
Add Bluetooth
Connect or
Disconnect Device
Remove Device
Beep
Calibrate Board
Lock or Unlock
Device
Select or Deselect
Presenter
Autoconnect Device
Properties
Used To
Locate and connect Bluetooth devices to the Workspace
software.
Disconnect the device or devices from communicating
with Workspace.
Deletes Device from Device Manager.
Identify a specific Interwrite Device. Click Beep to make
the device beep.
Align the Interwrite Pen position relative to the projected
image on the Interwrite Board's surface. Use the
Interwrite Pen to tap each white calibration point as it
appears on the blue screen.
Recalibration is required when either the Interwrite Board
or the projector has been moved.
Prevents all connected devices from inputting to the
current session. Locked Pads remain connected unless
they are powered off.
Allows for a specific device to control the interaction of
Workspace and has control over the other connected
Interwrite Devices in a session.
Connects pre-selected devices when Device Manager is
activated.
Opens the Properties window for the selected Interwrite
Device.
Getting Started