The Electronic Interactive Pen; Using The Pen; Sleep Mode - eInstruction InterwriteMobi Learner Getting Started

Getting Started
The Electronic Interwrite Pen II
The Interwrite Pen II is an input device to the computer. You will use it to
write and draw in Lesson Mode and to control mouse movements in Mouse
Mode by moving the tip of the Pen just above (in prox of) or touching the
Tablet's workspace surface. When the Pen Tip is in prox or touching the
Tablet's workspace surface, it simulates the same effects you would get using
the left mouse button both in Windows and on the Mac.

Using the Pen

When the Pen is in prox, press the bottom end of the Rocker Button to
simulate a left mouse button double-click in Windows and on the Mac. Press
the top end of the Rocker Button to simulate a right mouse button click in
Windows and a Ctrl-click on the Mac. In Windows, hold down the bottom
Rocker Button and touch the Pen Tip to the Tablet's workspace to erase. On
the Mac, with the Pen Tip touching the Tablet's surface, hold down the bot-
tom Rocker Button to erase.

Sleep Mode

The Pen goes into Sleep Mode after about two minutes of inactivity to
conserve power. Touching the Pen to a surface, or clicking one of its Rocker
Buttons, wakes up the Pen.
Rocker
Button
Pen Tip – Up or Down
Same as using Mouse
Bottom End – Double-Click Left Mouse Button
Top End – Right Click Mouse Button
Interwrite Mobi™
7