Maytag MGR8600DH00 User Instructions page 5

KEYPAD FEATURE INSTRUCTIONS
CONVECT Convection
BAKE baking and
roasting
1. Press CONVECT BAKE.
2. Press Temp/Time "+" or "-" keypads to set a temperature other than 350°F (175°C) in
5° increments between 170°F and 500°F (75°C and 260°C).
3. Press START.
4. To change the temperature, repeat Step 2. Press START for the change to take effect.
5. Press CANCEL when finished.
NOTE: The oven wi!! automatical!y turn off after 60 minutes,
DELAY START Delayed start The Delay Start keypad is used to enter the starting time for an oven function with a delayed start.
Delay start should not be used for foods such as breads and cakes because they may not bake
properly.
To set a Timed Cook or a Delayed Timed Cook, see "Timed Cooking" section.
COOK TIME Timed cooking Timed Cooking allows the oven to beset to turn on at a certain time of day, Cook foia set iength of
time, and!or shut off automatically.
To set a Timed Cook or aBe!dYed Timed C o0k'see Timed Cooking sect!on:
AQUALIFT Aqualift Self See the "Clean Cycle" section.
SELF CLEAN Clean cycle
START oven contr01 CheCk that the oven is off,
(hold 3,sec lockout 2' Piess and ho!d the START (h0id 3sec to lock)keypad for 3 Seconds:
zo lOCK/ 3' tone w II Sound, and i'Loc,, Will be d splaYed.
4, Repeat to uniockl On!y the Clock' Kitchen Timei and oven Light keYpads Will funCtion with the
controls locked. The cooktop functions are not affected by the oven control lockout.
COOKTOP USE
Fire Hazard
Do not let the burner flame extend beyond the edge of
the pan.
Turn off all controls when not cooking.
Failure to follow these instructions can result in death
or fire.
To Set:
1. Push in and turn knob counterclockwise to LITE.
All surface burners will click. Only the burner with the control
knob turned to Lite will produce a flame.
2. Turn knob to anywhere between HIGH and LOW.
I EMEMBER: When range is in use, the entire cooktop area
may become hot.
I
Power Failure
In case of prolonged power failure, the surface burners can be lit
manually. Hold a lit match near a burner and turn knob
counterclockwise to LITE. After burner lights, turn knob to setting.
Electric igniters automatically light the surface burners when
control knobs are turned to Lite.
Before setting a control knob, place filled cookware on the grate.
Do not operate a burner using empty cookware or without
cookware on the grate.