Sounds You May Hear; Before Calling; For Service - Kenmore 796.4158 Series Use & Care Manual

Hide thumbs Also See for 796.4158 Series:
Table of Contents

Advertisement

Available languages

Available languages

NORMAL
SOUNDS
YOU MAY HEAR
The following
sounds may be heard while the washer is
operating.
They are normal.
Clicklng:
Door locking mechanism clicks when the door locks and
unlocks.
Spraying or hissing:
Water spraying or circulating
during the cycle.
Humming or gurgllng:
Drain pump is pumping water from the washer at times
during a cycle.
Splashing:
Clothes tumbling
in the drum during the wash and rinse
cycles.
BEFORE CALLING
FOR SERVICE
If your washer does not function properly
or does not function
at all, check the following
before you call for service.
Rattling
and clanklng
Foreign objects, such as keys, coins, or safety
Stop washer, check drum and drain filter for
noise
pins, may be in drum or pump.
foreign objects. If noise continues after washer is
restarted, call for service.
Thumping sound
Vibrating noise
Heavy wash loads may produce a
thumping
sound.
Water leaklng around
washer
Excessive sudsing
Washer load may be out of balance.
Washing
shoes or tightly
tangled
clothes.
Shipping bolts and/or packaging materials
were not removed.
Wash load may be unevenly distributed in
the drum.
Not att leveling feet are resting firmly and
evenly on the floor.
Floor not rigid enough.
Inlet hose connection
is loose at tap
or washer.
House drain pipes are clogged.
Drain hose has come out of drain.
Drain hose is not inserted far enough.
Door glass is dirty.
Too much detergent
or incorrect
detergent.
This is normal. If sound continues, washer is
probably
out of balance. Stop and
redistribute
wash load.
Pause the cycle and redistribute
the load
after the door unlocks.
See the UNPACKING AND REMOVING SHIP-
PING BOLTSsection in the installation require-
ments.
Pausethe cycle and redistribute the load after
the door unlocks.
See Leveling the Washer in the Installation
Instructions.
Make sure that the floor is solid and does
not flex. See Flooring in the Installation
Requirements.
Check hoses. Check and tighten hose
connections.
Unclog drain pipe. Contact a plumber
if
necessary.
Tie drain hose to inlet hose or standpipe
to
prevent it from coming out during drain. It
should be inserted about 8-12 inches into
the standpipe.
Inspect door glass periodically
to make
sure there is no buildup of residue or other
foreign
matter. Follow cleaning
instructions.
_!_
nly use detergent
with the High-
Efficiency
(HE)logo,
See Detergent
Use in the How to Use section.
28

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents