Table of Contents
Advertisement
Removing and replacing the lift-off
oven door
The door is heavy. For safe, temporary storage, lay the door
flat with the inside of the door facing down.
To remove oven door:
1.
Open oven door completely (horizontal with floor - See
Fig. 1).
2.
Pu[[ the door hinge locks on both left and right door
hinges down from the oven frame completely towards
the oven door (See Fig. 2). A tool such as a small fiat-
blade screwdriver may be required.
3.
Firmly grasp both sides of oven door along the door
sides (Do not use the oven door handle =See Fig. 3).
4.
Close the door to the broil stop position (the oven door
will stop into this position just before fully closing).
5.
With the oven door in the broil stop position, [iftthe
oven door hinge arms over the roller pins located on
each side of the oven frame (See Fig. 4).
To replace
oven door:
1.
Firmly grasp both sides of oven door along the door
sides (Do not use the oven door handle - See Fig. 3).
2.
Holding the oven door at the same angle as the removal
position, seat the hook of the hinge arm over the roller
pins located on each side of the oven door frame (See
Fig. 4). The hook of the hinge arms must be fully
seated onto the roller pins.
3.
Fully open the oven door (horizontal with floor - See
Fig. 1).
4.
Push the door hinge locks up towards and into the oven
frame on both left and right oven door hinges (See Fig.
2) to the locked position.
5.
Close the oven door.
i
oven
door
Oven
door
hinge
locations
Fig. 2
Fig. 1
Special door care instructions
= Most oven doors
contain glass that can break.
Fig. 3
Read the following
recommendations:
1.
Do not close the oven door until all the oven racks are
fully in place.
2.
Do not hit the glass with pots, pans, or any other
object.
3.
Scratching, hitting, jarring or stressing the glass may
weaken its structure causing an increased risk of
breakage at a later time.
roller
pin ..
hinge i
arm
/
/
/
/
/
Fig. 4
Hide quick links:
Advertisement
Table of Contents
