D-Link DSL-2600U User Manual page 19

3. PPPOE / PPPOA
The following table describes the labels in this screen.
LABEL
Username
Password
VPI
VCI
Connection Type
Your ISP should provide the above information. Note that you must
enter the user name exactly as your ISP assigned it. If the assigned
name is in the form of user@domain where domain identifies a
service name, enter it exactly as given. Click on Back to return to
the previous screen, Next to continue, or Cancel to exit the wizard
without saving.
4. Bridge Mode
RFC 1483 explains two methods for Multiprotocol Encapsulation
over AAL5. The first method allows multiplexing of multiple
protocols over just one ATM virtual circuit (LLC-based multiplexing).
The second method assumes that each individual protocol is
carried over a separate ATM virtual circuit (VC-based multiplexing).
Please refer to RFC 1483 for more information.
DESCRIPTION
Enter your username here.
Enter your password here.
Enter the VPI here. VPI can range from 0 to 255.
Enter the VCI here. VCI can range from 1 to 65535.
Select your connection type from the dropdown list.
14