Checking And Choosing The Proper Location; Space Requirements; Installing On A Floor; Installing On A Pedestal Or Stacking Kit - LG WM3370HWA Owner's Manual

_2 INSTALLATION NSTRL CTIONS
Checking and choosing the proper location
Install the washing machine on a solid floor that
is strong and rigid enough to suppo_ the weight
of the washing machine, even when fu/y loaded,
without flexing or bouncing, If the floor has too
much flew you may need to reinforce it to make
it more rigid, ffthe floor is not solid, it may cause
severe vibration and noise.
1 Clean the floor before installation.
- Make sure to select sold and smooth ground.
2 Two or more people are needed for moving and
unpacking the washing machine_
3 Allow for sufficient space between the walls and
the washing machine for installation.
You must aIIow sufficient space for water fnes, the
drain line, and airflow.
@ NOTE
• The floor must be strong and rigid enough
to support the weight of the washer) when
fully loaded, without flexing or bouncing, If
your floor has too much flex, you may need
to reinforce it to make it more rigid.
A floor that is adequate for a top-loading
washer may not be rigid enough for a front°
loading washer, due to the difference in the
spin speed and direction, if the floor is not
solid, your washer may vibrate and you may
hear and feel the vibration throughout your
house,
• Before installing the washer, make sure
the floor is clean, dry and free of dust, dirt,
water and oil so the washer feet can not
siide easil% Leveling feet that can move or
slide on the floor can contribute to excess
vibration and noise due to poor contact with
the floor.
• If a drip pan must be used, take extra care
to folow the instructions provided with the
drip pan and make sure the leveling feet are
adjusted for firm and even contact with the
pan_ Use of drip pans and failure to properly
level the machine may result in increased
vibration and noise during operation.
......... .......
77V= =