Acard ANS-9010 Quick Installation Manual page 8

Backup LED indicator
LED Status
Steady Red
Steady Green
Blinking Green
Blinking Green per 4 seconds
Blinking Green per 2 seconds
Blinking Green per 1 second
OFF
Backup to CF button, push this button to trigger an immediately backup and overwrite the
data in CF card. (refer to restore and backup procedures for detail operation)
ANS-9010 restore and backup procedures
Condition Check
SATA
Power
CF exist CF capacity >= RAM Size
Yes
No
Power
On
Yes
Yes
Power
lost
No
CF card is too small or damaged to backup
CF card is ready to backup; Backup progress is complete
CF card is under backup
Backup progress is under 30%
Backup progress is between 30%~60%
Backup progress is over 60%
No CF card inserted
Working
Type
Yes
Auto
No
N/A
Yes Manual
Yes
Auto
No
N/A
Description
Functioning in ANS-9010
ANS-9010 will take the total memory size as RAM disk size.
Also it will auto restore data from CF to RAM if it has been
successfully backuped
ANS-9010 will take the total memory size as RAM disk size.
Restore and backup function will be disabled
ANS-9010 will take the total memory size as RAM disk size.
Restore and backup function will be disabled
In some cases, we have to force data restore from new
inserted CF to memory, push the restore button for 3
seconds as soon as the CF was detected and the restore
LED is in status of steady green (5 seconds only). And
ANS-9010 will take the total memory size as RAM disk size
and start to copy data from CF to memory.
On the other hand, if we want to manually backup data from
RAM to CF, push the backup button for 3 seconds when the
backup LED is in status of steady green. And ANS-9010 will
start to backup data from RAM to CF.
When the SATA power lost over 30 seconds, ANS-9010 will
automatically backup data from memories to CF and power
off
ANS-9010 will keep data refresh in memories until running
out of power. When the power is running out, the data will be
lost.
ANS-9010 will keep data refresh in memories until running
out of power. When the power is running out, the data will be
lost.