Acard ANS-9010 Quick Installation Manual page 7

ANS-9010 Panel
Restore from CF button, push this button to trigger an immediately restore and overwrite the
data in memories (refer to restore and backup procedures for detail operation)
Restore LED indicator
Steady Green for 5 seconds
Blinking Green
Blinking Green per 4 seconds
Blinking Green per 2 seconds
Blinking Green per 1 second
OFF
ANS-9010 Power LED
Steady Green
OFF
P0 and P1 LED indicators
LED
P0
P1
CF Socket
In order to use the maximum memory size, please must install CF which is larger then or equal
to the total capacity of memories.
Battery Capacity indicators,
When the ANS-9010 was supplied with power, the battery will be automatically charging until it
is full. As soon as the power lost, the battery will take over to supply power to controller and
memories. And the controller will automatically backup data from memories to CF card (only if
CF was connected and ready to be restored). If there is no CF card installed, the battery will
support keep refresh data for memories until running out of battery.
LED Status
LED Status
Port Port Status
SATA port is connected
SATA Port 0
SATA port is being accessed Blinking Green
SATA port is connected
SATA Port 1
SATA port is being accessed Blinking Green
Description
CF card is ready to be manually restored
CF card is under restoring
Restore progress is under 30%
Restore progress is between 30%~60%
Restore progress is over 60%
Restore progress is complete
Description
Power is ON
Power lose
LED Status
Steady Green
Steady Green