Frigidaire CGDS3065PFB Installation Instructions Manual page 4

Product dimensions
NOTE:
1. Do not pinch the power supply cord or
the flexible gas conduit between the
range and the wall.
2. Do not seal the range to the side
cabinets.
3.24" (61 cm) minimum clearance
between the cooktop and the bottom of
the cabinet when the bottom of wood
or metal cabinet is protected by not
less than ¼" (0,64 cm) flame retardant
millboard covered with not less than
No. 28 MSG sheet metal, 0,015" (0,4
mm) stainless steel, 0.024" (0,6 mm)
aluminum, or 0,020" (0,5 mm) copper.
30" (76,2 cm) minimum clearance when
the cabinet is unprotected.
4. For cutouts below 22 7/8" (58, ! cm),
appliance will slightly show out of the
cabinet.
5. Allow at least 19 ¼" (48,9 cm) clearance
for door depth when it is open.
Door
Open
21¾"
(55.25 cm)
C
;ide Panel
IMPORTANT:
To avoid cooktop breakage for cutout width (E dimension) of more
than 30 1/16" (76,4 cm), make sure the appliance is centered in the counter opening
while pushing into it. Raise leveling legs at a higher position than the cabinet height
(see page 3), insert the appliance in the counter and then level.
Make sure the unit
is supported by the leveling legs and NOT by the cooktop itself.
22 7/8" (58,1 cm) min.
23 1/4" (59,05 cm) max.
(see Note 4) -_
___ ! 1/8"
FRONT OF (2,86:m) /
CABINET
'_ |Ref. _1
/
A. HEIGHT " B. WIDTH C:
(Under C00kt0P)COOKTOP
WIDTH
35 7/8" (91,1 cm) 30" 31 1/2"
36 5/8" (93 cm) (76,2 cm) (80 cm)
D, TOTAL
DEPTH TO
FRONT OF
RANGE
28 5/16"
(71,9 cm)
E. CUTOUT I F. CUTOUT I G: HEIGHT
WIDTH DEPTH I OF COUNTERTOP
(C0untertop
and cabinet) . .
30_+1/16" 21 3/4" (55,2 cm) Min. 35 7/8" (91,1 cm) Min.
(76,2_+0,15 cm) 22 1/8" (56,2 cm) Max 36 5/8" (93 cm) Max.
24" (61 cm) Min. with
backguard