Table of Contents
Advertisement
NOTE: Removing the doors is always recommended
when it is necessary to move the refrigerator
through a narrow
opening,
if it is necessary to remove the handles, follow the directions
below.
HOW TO REMOVE FREEZER DOOR HANDLE
NOTE:
Handle appearance
may vary from illustrations
on
this page.
Removing Freezer Drawer Handle
Loosen the set screws located on the lower side of
the handle with a 1/8in. Alien wrench and remove the
handle.
NOTE: If the handle mounting fasteners need to be
tightened
or removed,
use a 1/4 in. Alien wrench.
HOW TO REPLACE FREEZER DOOR HANDLE
NOTE: Handle appearance
may vary from illustrations on
this page.
Replacing Freezer Drawer Handle
Place the handle on the door by fitting the handle
footprints
over the mounting fasteners and tightening
the set screws with a 1/8in. Alien wrench.
NOTE: If the handle mounting fasteners need to be
tightened
or removed, use a 1/4 in. Alien wrench.
When assembling or disassembling the handles:
•
Grasp the handle firmly to ensure it will not drop or
cause injury.
•
Prevent the handle from swinging toward nearby
people or animals.
•
insert the bracket hole of the handle into the stopper
bolt of the door exactly, then assemble the set screws
to fix the handle in place.
•
Check for any gap between the door and handle after
the handle is fixed in place.
12
Hide quick links:
Advertisement
Table of Contents
