Sharp AE-XM24HR Service Manual page 36

AEXM24HR
9) Disconnect the 7 connectors.
Fan motor / Reverse valve
Thermistor/ Expansion valve
10)Remove the compressor cover.
Compressor cover
11)Remove the terminal cover and disconnect 3 terminals.
note: Caution to the connectors' position when reinstalling.
White(C)
Red(s)
Orenge(R)
thermistor(Red)
Compressor
5 – 2
12)Remove the 5 screws fixing the controlbox assembly.
13).Cut the2 insulators.
14)Remove the 3 screws fixing the bulkhead.
C ut