Robomow City 110 Operating & Safety Manual page 5

Base Station
30. Never let Robomow operate without supervision.
31. When programming the automatic start times and days, insure these windows of operation are
programmed when children, pets and other bystanders are not on the lawn.
32. Do not place metal objects in the area of the Base Station contacts.
33. After removing the fuse from the mower always reset the current time and date. Failure to do so
may result in non-intentional operation of the Robomow, which may cause sever bodily injuries.
34. Do not spray water directly into the Base Station area.
Transport
To safely move from or within the working area:
35. Use the Remote Control (available as an accessory) to
drive it from place to place.
36. In case of different height level or stairs, turn off the mower
by pressing the Main Switch button, lift the bumper door,
located at the top of the Robomow, and carry the mower by
the carrying handle, while the rear bottom side is laying on
your thigh, as shown in the right figure.
37. In case of long transportation by car it is required to remove
the fuse and use the original packaging.
Maintenance and storage
38. Maintain, service, and store Robomow
39. Remove the battery fuse before working on or lifting Robomow. Remove the battery fuse before
any maintenance is done.
40. Keep all nuts, bolts, and screws tight to assure safe condition of this appliance.
41. Replace worn or damaged parts for safety.
42. Use heavy gloves when inspecting, servicing or replacing the blade.
43. Use only the original equipment, batteries and power supply/charger with this mower. Incorrect
use may result in electric shock, overheating or leakage of corrosive liquid from the battery.
44. Do not open or mutilate the battery. Released electrolyte is corrosive and may damage the eyes
or skin.
45. Wear eye protection and use gloves when setting the perimeter wire and driving the wire
stakes/pegs. Firmly drive all pegs in order to keep the wire from becoming a tripping hazard.
46. Do not use the power supply/charger if the cord has damaged.
47. A spark may be created when inserting the fuse to the robot. Therefore it is forbidden to perform
these tasks close to flammable materials. It is also forbidden to use spray or any other cleaning
materials for cleaning electronic contacts, due to this risk of inflammation when inserting the
power pack or fuse.
Product end of use
48. Robomow and its accessories should be collected separately at the end of their life to prevent
waste electrical and electronic equipment from ending up in landfill sites, to promote the reuse,
treatment and recovery of electrical and electronic equipment in purpose to preserve, protect and
improve the quality of the environment, protect human health and utilize natural resources
prudently and rationally.
49. Do not dispose Robomow or any other part of it (including the Charger, Base Station and
Perimeter Switch) as unsorted municipal waste – it should be collected separately.
50. Ask your local distributor/dealer about return and collection systems available.
51. Do not dispose of the batteries in a fire and do not place used batteries in your household trash.
The batteries must be collected, recycled, or disposed of in an environmentally sound manner.

according to the instructions (refer to chapter 5).
5