Makita G341O R Instruction Manual page 25

3. STOPPING THE GENERATOR
(a) Switch off generator's AC breaker.
(b) Turn off the power switch of the electric
equipment and unplug the cord from
receptacle of the generator.
(c) Allow the engine about 3 minutes to cool
down at no-load before stopping.
(d) Push the stop button until the engine
stops.
(e) Close the fuel cock.
4.
OIL SENSOR
(a) The oil sensor detects the fall in oil level
in the crankcase and automatically
stops the engine when the oil level falls
below a predetermined level.
(b) When engine has stopped automatically,
switch
off
generator's AC breaker, check
the oil level. Refill engine oil to the upper
level as instructed on page 5 and restart
the engine.
(c) If the engine does not start by usual
starting procedures, check the oil level.
CAUTION]
Do not remove OIL SENSOR PROBE when refilling with oil. Remove oil
filler cap on the opposite side of carburetor.
-
17
-