Machine Speed; Oiling - Reliable Barracuda 2000U Instruction Manual

SPEED OF MACHINE
The maximum speed recommended for this machine is 900 RPM or "stitches per
minute". Use regular house-hold circuit 115 Volts, 60 HZ. The machine is equipped with
a one tenth (1/10) HP motor with reduction pulley to provide good power at the recom-
mended speed.
This sewing machine can be mounted on a commercial stand. To do so, requires a special
cut-out table top, a one inch (1 ˝) diameter pulley, a special Balance Wheel Item No. 11,
and a maximum 1725 RPM motor.

OILING

Before operating , oil all "metal to metal" working parts, and at the places indicated on
diagrams below. Use only genuine sewing machine oil. Operate the machine briefly on
scrap material after oiling to prevent soiling the work. Frequent oiling is recommended.
01