To Remove The Hook And Clean The Race - Reliable Barracuda 2000U Instruction Manual

TO REMOVE THE HOOK AND CLEAN THE RACE DO NOT
FORCE ANY OF THESE OPERATIONS
1. Turn the balance wheel by hand until the needle is at its highest point.
2. Remove the bobbin and bobbin case.
3. Turn knob (A) one half turn toward you.
4. Turn knob (B) one half turn away from you.
5. Remove retaining ring (C) and hook (D) by grasping the axle of the hook.
6. Remove accumulated lint and thread from the retaining ring, hook, and race body.
7. Replace hook (D) in race body with the axle facing out, forming a perfect circle with
the driver (E).
8. Replace retaining ring (C). polished side out, so that both pins are under knobs (A)
and (B).
9. Lock the retaining ring knobs (A) and (B).
10. Replace bobbin and bobbin case, and resume sewing.
BOBBIN
D
C
BOBBIN CASE
E
B
A
AXLE
08