1. Manuals
  2. Brands
  3. Allnet Manuals
  4. IP Camera
  5. ALL2205
  6. User manual

Allnet ALL2205 User Manual

Hide thumbs Also See for ALL2205:
Table of Contents

Advertisement

Quick Links

Download this manual
ALL2205 User Manual
ALL2205
User Manual
0
ALLNET GmbH © 2009 –
www.allnet.de

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ALL2205 and is the answer not in the manual?

Questions and answers

Related Manuals for Allnet ALL2205

Summary of Contents for Allnet ALL2205

  • Page 1 ALL2205 User Manual ALL2205 User Manual ALLNET GmbH © 2009 – www.allnet.de...

  • Page 2: Table Of Contents

    ECURITY 8.4.1 Account ............................... 50 8.4.2 HTTPS ................................51 8.4.3 IP Filter ................................ 52 CHAPTER 9. SETTING-ADVANCED ......................... 53 9.1 FTP C ................................53 LIENT 9.1.1 General ................................ 53 9.1.2 Alarm Sending ............................54 ALLNET GmbH © 2009 – www.allnet.de...
  • Page 3 YSTEM C.1. 16 Channel IP Camera with CIF Performance ..................85 C.2. 16 Channel IP Camera with D1 Performance ..................85 ..............................86 LOSSARY OF ERMS EC – D ......................... 90 ECLARATION OF CONFORMITY ALLNET GmbH © 2009 – www.allnet.de...

  • Page 4: Chapter 1. Safety Instruction

    Close to sources of powerful electromagnetic radiation, such as radios or TV • transmitters Locations subject to strong vibration or shock • In case of a breakdown In case of system breakdown, discontinue use and contact your authorized dealer. ALLNET GmbH © 2009 – www.allnet.de...
  • Page 5 Do not use volatile solvents such as alcohol, benzene or thinners as they may • damage the surface. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 6: Chapter 2. Minimum System Requirement & Product Feature

    Windows 7, and Mac OS X Leopard Web Browser Internet Explorer 6 or later Note: Please keep updating the latest Windows software and service package. (Ex: Net Framework, Windows Media Player, Enhance ActiveX Security) ALLNET GmbH © 2009 – www.allnet.de...

  • Page 7: Product Features

    F1.8, 4.2mm Megapixel board lens Lens 5 φ IR LEDs x 6 IR LEDs IR working distance I / O 1 in / 1 out Audio Output 12V DC, 1A, Max 5W Power NETWORK Wireless IEEE 802.11b/g ALLNET GmbH © 2009 – www.allnet.de...

  • Page 8: Chapter 3. Using Ip Camera Via Web Browser

    3. The monitor image will be displayed in your browser. In the far left side of main configuration are Setting, Client Setting, and Image Setup. For more details, you can check Chapter 7.2、Chapter 7.3、Chapter 7.4 and Chapter 7.5. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 9: Mac Web Browser

    Note : The default user name “admin” and the password are set at the factory for the administrator. You can change them in the Account Menu (Please check “Setting → Basic → Security → Account”) ALLNET GmbH © 2009 – www.allnet.de...
  • Page 10 3. The monitor image will be displayed in your browser. In the far left side of main configuration are Setting, Client Setting, and Image Setup. For more details, you can check Chapter 7.2、Chapter 7.3、Chapter 7.4 and Chapter 7.5. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 11: Chapter 4. Setting Up Wireless Configuration

    5. Enter password at active transmit key if you need. If you don't know the setting of the wireless AP, please ask your network administrator. 6. Choose the option of Obtain an IP address automatically (DHCP) and Obtain DNS server address automatically. ALLNET GmbH © 2009 – www.allnet.de...
  • Page 12 IP address of DNS server. Primary DNS server: Enter the IP address of the primary DNS server. Secondary DNS server: Enter the IP address of the secondary DNS server, if necessary. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 13: Chapter 5. Operating Ip Camera Via Mobile Phone

    Browser. <IP> is the Public IP address of your IP camera. 5.1.3 2.5G Mobile Phone Browser Viewing For 2.5G mobile phone viewing, type “http://<IP>/mobile.wml ” into your 2.5G Web Browser. <IP> is the Public IP address of your IP camera. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 14: Using Ip Camera Via Iphone

    ALL2205 User Manual 5.2 Using IP Camera via iPhone You can use ALLNET Web User Interface via iPhone. Please follow the setting process below. Then you can use ALLNET Web UI via iPhone. 2. Type IP address in your web link.

  • Page 15: Chapter 6. Msn Messenger

    8. The Camera at home will show up with its Public IP and Private IP if the option of IP Notification is “On”. ( You can enter “Ping” to show up with Public IP and Private IP. ) 9. Click on the small camera icon Then, choose “View a new contact's webcam”. ALLNET GmbH © 2009 – www.allnet.de...
  • Page 16 12. The dialog box will show up with “This 13. The IP Camera will accept your invitation application is not part if Window Live to start Control Panel. Message…….” Tick the box of “Don’t show me this again” and click OK. ALLNET GmbH © 2009 – www.allnet.de...
  • Page 17 Then, you can use the tool bar to optimize video Brightness , Contrast Saturation and Sharpness . After the adjustment of all setting, you can still click to make the setting back to the original setting. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 18: Chapter 7. Configuration Of Main Menu

    In the right side, you can control Live View in your main Browser. The functions include Snapshot, Open digital zoom, Audio, and Video Play. Full screen Snapshot Open digital zoom Audio Play Video Play ALLNET GmbH © 2009 – www.allnet.de...

  • Page 19: Live View

    Pull the to adjust the digital zoom range, and it will be showed on the above window. Use the left click of your mouse to move to anywhere in the window area. ALLNET GmbH © 2009 – www.allnet.de...
  • Page 20 IP camera(s) via the Ethernet using your microphone Mute on mean you can’t broadcast to the connected IP camera(s) via the Ethernet using your microphone Volume control bar mean you can adjust the sound volume by the control bar ALLNET GmbH © 2009 – www.allnet.de...

  • Page 21: Setting

    Chapter 8.4. Click Advanced folder, there are sub-folders including FTP Client, SMTP, Network storage, HTTP event, Schedule, Alarm buffer, Motion Detection, Audio Detection, and System Log. For more information, please see Chapter 9. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 22: Client Setting

    Select the transferring protocol among TCP, UDP, and HTTP. 7.3.4 Video Buffer Turn the Video Buffer function On / Off. The Video Buffer function makes the streaming more smoothly in unsteady network environment, but might cause a little delay in live viewing. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 23: Image Setup

    The higher value the saturation is, the more colorful the image will be . 7.4.4 Sharpness The value range is 0~99. It applies image processing techniques to adjust the sharpness of live view. However, higher the value is, more the noise is. ALLNET GmbH © 2009 – www.allnet.de...
  • Page 24 Exposure, if you set the Exposure mode under “Settings/Basic/Camera/Advanced” to Auto. 7.4.5 Default After the adjustment of all setting, you can still click Default to make the setting back to the original setting. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 25: Chapter 8. Setting-Basic

    8.1 System Click the folder of System to display the sub-folders including Information, Date / Time, Initialize, and Language. 8.1.1 Information The Information screen provides the product factory information which includes Product Name, Firmware Version. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 26: Date / Time

    IP Camera. Synchronize with NTP: Specify the NTP server name and the Refresh Interval to synchronize the date and time of this IP Camera with those of the time server, known as the NTP server. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 27: Initialize

    A confirmation dialogue will appear and then click “OK” to execute. The network indicator on this IP Camera will start to blink. This IP Camera will reboot automatically after completing adjustments to the default setting. Don't turn off this IP Camera until the device reboots. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 28: Language

    Upload Language Pack: Clicking “Browse” and selecting the file for updating, the present language display of WEB User Interface could be changed. A confirmation dialogue will appear. Click “OK”, then the update will be applied immediately. The default language is “English.” ALLNET GmbH © 2009 – www.allnet.de...

  • Page 29: Camera

    PHONE. While the option selected, your mobile phone will receive the audio file from IP Camera. And you can choose the bit rate from 4.75k to 12.2k. However, the usage of this codec will cause frame-rate decreasing. ALLNET GmbH © 2009 – www.allnet.de...
  • Page 30 Text Overlay: Some information can be showed on the display screen, such as Date / Time and user-defined text. And the background color can be chosen. Privacy Mask: A specific area of the video image can be covered. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 31: H.264

    Note: The frame rate is up to 15 fps at 1280x1024, and up to 30 fps at 640x480. However, if you would like choose frame rate over 15 fps, the IMAGE SIZE of H.264/MPEG-4/MJPEG setting page has to been selected 320x240 or 640x480 at the same time. ALLNET GmbH © 2009 – www.allnet.de...
  • Page 32 General” ), which is for recording compression, is chosen H.264, the IP interval option will appear “Auto” automatically and can’t select. The limit is for avoiding damaging the recording quality of 5 seconds temporary-saved video recorded on FTP server. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 33: Mpeg-4

    Note: The frame rate is up to 15 fps at 1280x1024, and up to 30 fps at 640x480. However, if you would like choose frame rate over 15 fps, the IMAGE SIZE of H.264/MPEG-4/MJPEG setting page has to been selected 320x240 or 640x480 at the same time. ALLNET GmbH © 2009 – www.allnet.de...
  • Page 34 Note: If Video clip format of General Menu, which is for recording compression, is chosen MPEG-4, the IP interval option will appear “Auto” automatically and can’t select. The limit is for avoiding damaging the recording quality of 5 seconds temporary-saved video recorded on FTP server. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 35: Mjpeg

    Note: The frame rate is up to 15 fps at 1280x1024, and up to 30 fps at 640x480. However, if you would like choose frame rate over 15 fps, the IMAGE SIZE of H.264/MPEG-4/MJPEG setting page has to been selected 320x240 or 640x480 at the same time. ALLNET GmbH © 2009 – www.allnet.de...
  • Page 36 1Mbps, 1.5 Mbps, 2 Mbps, 3 Mbps, 4 Mbps, 5 Mbps, and 6 Mbps. Note: Concerning how to select the suitable image quality for Fixed Quality or Fixed Bitrate, please refer to the CHAPTER 10. APPENDIX / A. Frame-rate & Bitrate Table. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 37: 3Gpp

    The ratio lower, the live view clear. However, live view will lag if the bandwidth isn’t big enough. In this situation, you have to choose another bigger IP interval value to solve the problem. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 38: Advanced

    High Speed Mode: Choose High Speed Mode and the shutter speed will be close 1/120 sec. as far as possible to help to capture the motion image of sports or high-speed phenomena. Manual: Choose Manual and you can select options, including Shutter Speed and Gain. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 39: Playback

    Besides, you can still have the live view in the screen. The function of each button is as below illustration: Fast Forward Volume Pause Rewind Mute on / Mute off Stop Open Files Previous Track Open Digital Zoom Next Track ALLNET GmbH © 2009 – www.allnet.de...

  • Page 40: Network

    Obtain an IP address automatically (DHCP): If a DHCP server is installed on the network, to select this while the IP address is assigned by the DHCP server. Obtain DNS server address automatically: Select this to obtain the address of DNS server automatically. ALLNET GmbH © 2009 – www.allnet.de...
  • Page 41 Note: The IP Camera needs to be rebooted after it finishes changing the network setting completely. Note: If you connect the IP Camera with your computer directly, the default network domain of camera is 192.168.1.xx ALLNET GmbH © 2009 – www.allnet.de...

  • Page 42: Pppoe

    Password: Enter the password for authentication necessary for PPPoE connections. Type it up to 32 characters. Re-type Password: Re-type the password to confirm. Obtain DNS server address automatically: Select this to obtain the address of DNS server automatically. ALLNET GmbH © 2009 – www.allnet.de...
  • Page 43 XDSL (digital affiliate line such as ADSL, VDSL or SDSL) 2. The IP Camera needs to be rebooted after it finishes changing the network completely. 3. The IP Camera with Intelligent IP Installer can’t be founded after turning on the PPPoE and reboot. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 44: Ddns (Dynamic Dns)

    Host Name: Enter the host name that is registered to the DDNS server. You can apply DDNS Note : How to apply DDNS username and Host name?? username and Host name by the following steps: ALLNET GmbH © 2009 – www.allnet.de...

  • Page 45: Upnp (Universal Plug And Play)

    RTSP Port: Enter the RTSP port, default value is 554 for computer view. Note : UPnP (Universal Plug and Play): UPnP is a set of computer network protocol. It allows devices to connect seamlessly and simplify the implementation of networks in the home and corporate environments. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 46: Bonjour

    IP addresses or configure DNS servers. Device Name: Enter Device Name you wish. Note: How to use Bonjour in your Windows Browser UI? Please check the link below: http://www.apple.com/support/downloads/bonjourforwindows.html ALLNET GmbH © 2009 – www.allnet.de Setting-Basic Network...

  • Page 47: Ip Notification

    Authentication: Select the authentication required when you send an email. Off: Select if no authentication is necessary when an email is sent. On: When authentication is necessary an e-mail is sent, there are SMPT, POP before SMPT or both three options. ALLNET GmbH © 2009 – www.allnet.de...
  • Page 48 IP notification. Message: Type the text of the E-mail up to 384 characters. Default value provides network information including IP, Port, MAC, Model, Firmware Version and Web Version. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 49: Wireless

    Bit Rate - Shows the bit rate in Megabit/s. This can only be shown for the access point currently in use. Note that the bit rate shown is the current rate, and that this value may vary over time. ALLNET GmbH © 2009 – www.allnet.de...
  • Page 50 2. WEP (Wired Equivalent Protection) the original security standard used in wireless networks that provides a minimal level of security that can deter minor trespasses. The administrator can select the key length among 64 or 128 bits. 64bits is the default setting. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 51: Messenger

    Video Mode: You can choose to receive video streaming from Computer view (MPEG-4) or Mobile view (3GPP). IP Notification: Switch the IP notification On / Off. If this feature switches On, camera will send IP notification to the users who are allowed. ALLNET GmbH © 2009 – www.allnet.de...
  • Page 52 Privacy: Switch privacy On / Off. When privacy turns on, only those users in allow list can access the camera User: Input to this blank to edit allow list. Allow List: When privacy turns on, only those users in allow list can access the camera. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 53: Security

    (only for PTZ models). The Viewer mode only can view the Live View. Viewer Authentication: Select On, allows any viewer direct access to Live View. Select Off, allow admin, operator, or viewer access to Live View. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 54: Https

    Note: When enable HTTPS with RTSP on mode, the IP Camera only protect the setting such as username and password and do not protect video and audio. When enable HTTPS with RTSP off mode, the IP Camera will protect all setting including video and audio. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 55: Ip Filter

    Deny Range: You can define the deny range by entering “Start IP address” and “End IP address” Deny Range List: You can define not more than five sets of deny range in the list. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 56: Chapter 9. Setting-Advanced

    Note: The frame rate and operability on the main viewer may decrease while a file is being transmitted by the FTP client function. FTP Server Name: Type the FTP server name to upload still images up to 64 characters, or the IP address of the FTP server. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 57: Alarm Sending

    Set to forward a snapshot or video clip file to the specified FTP server linked with the alarm detection by the external sensor input or by the built-in motion detection function. Select On to send the file to FTP server linked with the alarm detection. ALLNET GmbH © 2009 – www.allnet.de...
  • Page 58 It’s for recording audio file in the IP CAM before and after disconnected network. Note: You can set alarm buffer at alarm buffer screen. (Please go “Setting → Advanced → Alarm Buffer → Setting”) For more details, you can check Chapter 9.6. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 59: Periodical Sending

    Sequence number clear: Click Clear and the suffix of the sequence number returns to 1. Interval: Set the periodical sending is effective interval. Min value is 1 min and Max value is 24 hour. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 60: Smtp

    Select Off, if you do not wish to use the E-mail (SMTP) function. Note : The Setting of general part will be the same as IP Notification. (Please check “Setting → Basic → Network → IP Notification”) ALLNET GmbH © 2009 – www.allnet.de...
  • Page 61 5-seconds video clip will be transmitted. Subject: Type the subject/title of the e-Mail up to 64 characters. With respect to mail which is sent according to the alarm detection when Alarm sending of the ALLNET GmbH © 2009 – www.allnet.de...
  • Page 62 Message: Type the text of the E-mail up to 384 characters. (A line break is equivalent to 2 characters.) Test: After setting the SMPT server information, you can tick the test key to test if the connection between IP CAM and the SMPT server works. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 63: Alarm Sending

    (2 digits), thus 14-digit number is added to the file name. Sequence number: A consecutive number is added to the Image file name. Sequence number clear: Click Clear and the suffix of the sequence number returns to 1. ALLNET GmbH © 2009 – www.allnet.de...
  • Page 64 Schedule setting in the other section. Note: You can set schedule function at schedule screen. (Please go “Setting → Advanced → Schedule → Setting”) For more details, you can check Chapter 9.5. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 65: Periodical Sending

    Please check “Setting → Basic → Advanced → Schedule → Setting.” Note: You can set schedule function at schedule screen. (Please go “Setting → Advanced → Schedule → Setting”) For more details, you can check Chapter 9.5. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 66: Network Storage

    For example, //IP/folder name or // my_nas:/folder name. Protocol - Windows network (SMB/CIFS):. Network Storage Location: Type the IP or name of specified computer and folder. For example, //IP/folder name or //my_nas:/folder name. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 67: Alarm Sending

    (2 digits), hour (2 digits), minute (2 digits) and second (2 digits), and consecutive number (2 digits), thus 14-digit number is added to the file name. Sequence number: A consecutive number is added to the Image file name. ALLNET GmbH © 2009 – www.allnet.de...
  • Page 68 Schedule setting in the other section. Note: You can set schedule function at schedule screen. (Please go “Setting → Advanced → Schedule → Setting”) For more details, you can check Chapter 9.5. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 69: Periodical Recording

    Schedule setting in the other section. Note: You can set schedule function at schedule screen. (Please go “Setting → Advanced → Schedule → Setting”) For more details, you can check Chapter 9.5. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 70: Http Event

    General and Alarm sending. 9.4.1 General HTTP event: Set up the HTTP server URL, port, User ID, Password, and Proxy server settings. For example: URL: 192.168.1.7/cgi-bin/operator/ptzset Note: The setting of URL should be the same as CGI. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 71: Alarm Sending

    Parameter: the parameter of CGI (defined in URL of HTTP → General) is from your target device. For example, move=down. Message: message will show up in the form of Message = PTZ down. If your target device didn’t support the parameter of message, you ALLNET GmbH © 2009 – www.allnet.de...
  • Page 72 It’s for recording audio file in the IP CAM before and after disconnected network. Note: You can set alarm buffer at alarm buffer screen. (Please go “Setting → Advanced → Alarm Buffer → Setting”) For more details, you can check Chapter 9.6. ALLNET GmbH © 2009 – www.allnet.de...
  • Page 73 Note: You can set schedule function at schedule screen. (Please go “Setting → Advanced → Schedule → Setting”) For more details, you can check Chapter 9.5. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 74: Schedule

    Use the same time schedule every day: When this is checked, the Start Time and End Time set to Mon (Monday) are applied to all days. In this case, the Start Time and End Time of the other days than Mon (Monday) cannot be input. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 75: Alarm Buffer

    After re-connecting, these files will transmit to FTP client, SMTP, Network storage, or HTTP event. You can set the pre-alarm and post-alarm period up to 5 seconds in Alarm Buffer function screen. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 76: Motion Detection

    You can adjust and move the detecting zone by using mouse. Motion Detection 3: Click it on for using Motion Detection 3 function as a sensor. You can adjust and move the detecting zone by using mouse. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 77: Audio Detection

    Sensitivity: It means that how often the sensor will scan the image different. The higher sensitivity it is and the more frequently it scans. The default value is 5 and the value range is 1~10. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 78: System Log

    The System Log function allows users to review any changes and events happened. The system starts logging automatically after started. Enable Remote Log: Enables user to send the log data to a specified log server. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 79: Chapter 10. Appendix

    1280*1024 2048 2200 1280*1024 2048 2200 1280*1024 1280*1024 1280*720 6144 6300 1280*720 6144 6300 1280*720 2048 2200 1280*720 2048 2200 1280*720 1280*720 640*480 6144 6300 640*480 6144 6300 640*480 2048 2200 640*480 2048 2200 ALLNET GmbH © 2009 – www.allnet.de...
  • Page 80 1280*720 2048 2200 1280*720 2048 2200 1280*720 1280*720 640*480 6144 6300 640*480 6144 6300 640*480 2048 2200 2200 640*480 2048 640*480 640*480 320*240 6144 2200 320*240 6144 1800 320*240 2048 2200 320*240 2048 1800 ALLNET GmbH © 2009 – www.allnet.de...
  • Page 81 2200 640*480 Excellent 7800 640*480 Excellent 5500 640*480 Good 2900 640*480 Good 2000 640*480 Medium 1400 640*480 Medium 1000 320*240 Excellent 2600 320*240 Excellent 1700 320*240 Good 1100 320*240 Good 320*240 Medium 320*240 Medium ALLNET GmbH © 2009 – www.allnet.de...

  • Page 82: Vga Model

    320*240 2048 2200 320*240 320*240 A.2.4 MPEG4 @ 30fps / kbps Quality 640*480 320*240 Excellent 1400 Detailed 1000 Good Standard Medium A.2.5 MPEG4@ 15fps / kbps Quality 640*480 320*240 Excellent Detailed Good Standard Medium ALLNET GmbH © 2009 – www.allnet.de...
  • Page 83 Excellent 15000 640*480 Excellent 7500 640*480 Good 5500 640*480 Good 2800 640*480 Medium 2600 640*480 Medium 1400 320*240 Excellent 5000 320*240 Excellent 2600 320*240 Good 2000 320*240 Good 1200 320*240 Medium 1000 320*240 Medium ALLNET GmbH © 2009 – www.allnet.de...

  • Page 84: Storage Requirement Table - Help To Set Recording Storage System

    1280*720 45.7 640*480 6144 522.9 640*480 6144 522.9 640*480 2048 182.6 640*480 2048 182.6 640*480 45.7 640*480 45.7 320*240 6144 423.3 320*240 6144 298.8 320*240 2048 182.6 320*240 2048 182.6 320*240 45.7 320*240 45.7 ALLNET GmbH © 2009 – www.allnet.de...
  • Page 85 1280*720 45.7 640*480 6144 522.9 640*480 6144 522.9 640*480 2048 182.6 640*480 2048 182.6 640*480 45.7 640*480 45.7 320*240 6144 182.6 320*240 6144 149.4 320*240 2048 182.6 320*240 2048 149.4 320*240 45.7 320*240 45.7 ALLNET GmbH © 2009 – www.allnet.de...

  • Page 86: Vga Model

    Excellent 116.2 20.8 Detailed 13.3 Good 49.8 Standard 33.2 Medium 24.9 B.2.5. MPEG4 Storage Requirement GB / channel / day @ 15fps Quality 640*480 320*240 Excellent 74.7 Detailed 11.7 Good 37.4 Standard Medium 16.6 ALLNET GmbH © 2009 – www.allnet.de...
  • Page 87 6300 522.9 640*480 2048 2200 182.6 640*480 2048 2200 182.6 640*480 45.7 640*480 45.7 320*240 6144 5100 423.3 320*240 6144 2800 232.4 320*240 2048 2200 182.6 320*240 2048 2200 182.6 320*240 45.7 320*240 45.7 ALLNET GmbH © 2009 – www.allnet.de...

  • Page 88: System Requirement - Help To Setup System

    Memory: 2048 MB (2 x 1024 DDR2-SDRAM ) Ethernet: VIA Rhine II Fast Ethernet Adapter Hard Disk: ST3250620A (250 GB) Graphic card: ATI Technologies Inc EAX1600 Series Operating System: Windows XP Professional SP2 x64 ALLNET GmbH © 2009 – www.allnet.de...

  • Page 89: Glossary Of Terms

    10Mbps (traditional Ethernet), 100Mbps (Fast Ethernet), and 1,000Mbps (Gigabit Ethernet). Most Ethernet networks use Category 5 cabling to carry information, in the form of electrical signals, between devices. Ethernet is an implementation of CSMA/CD that operates in a bus or star topology. ALLNET GmbH © 2009 – www.allnet.de...
  • Page 90 JPEG compression, and then decompressing and displaying each frame at rapid speed to show the moving picture. MPEG4 MPEG4 is designed to enable transmission and reception of high-quality audio and video over the Internet and next-generation mobile telephones. ALLNET GmbH © 2009 – www.allnet.de...
  • Page 91 Workstations, single-attach stations, dual-attach stations, and concentrators are FDDI stations. Subnet mask In TCP/IP, the bits used to create the subnet are called the subnet mask. ALLNET GmbH © 2009 – www.allnet.de...
  • Page 92 Wi-Fi Protected Access 2, the latest security specification that provides greater data protection and network access control for Wi-Fi networks. WPA2 uses the government-grade AES encryption algorithm and IEEE 802.1X-based authentication, which are required to secure large corporate networks. ALLNET GmbH © 2009 – www.allnet.de...

  • Page 93: Ec - Declaration Of Conformity

    R&TTE Directive 1999/5/EC: The ALL2205 Megapixel Fixed WLAN IP Camera conforms to the 73/23/EEC Low Voltage Equipment directive, amended by 93/68/EEC This equipment meets the following conformance standards:...
  • Page 94 GPL Licensed Declaration DISCLAIMER FOR ALLNET-PRODUCTS WHICH CONTAIN GPL-LICENSED SOFTWARE The Allnet-product you have bought is using Linux software and parts of the netfilter/iptables-project. (www.netfilter.org), which both are licensed using the GPL (General Public License, available for download at (www.gnu.org/home.de.html).
  • Page 95 Manufacturer: ALLNET GmbH ALLNET Deutschland GmbH Maistrasse 2 82110 Germering Tel. +49 89 894 222 22 Fax +49 89 894 222 33 E-Mail: info@allnet.de ALLNET GmbH © 2009 – www.allnet.de...

Table of Contents