Option Buttons - Kenmore 796.31412310 Use & Care Manual

OPTION BUTTONS (continued)
MY CYCLE
@
My
Cycle
I Y CYCLE allows you to store a customized
wash cycle for future use. It allows you to save
favorite temperature, spin speed, soil level,
and other options for a cycle, and then recall
them at the touch of a button.
NOTE: You can only save one cycle at a time. Pressing
and holding the MY CYCLE button will overwrite any
previously saved cycle.
To save a MY CYCLE:
O Press the POWER button to turn on the washer.
O ress the Cycle Button repeatedly until the desired
cycle is selected.
O ress the CYCLE MODIFIER button to change the desired
setting.
O Press the CYCLE OPTION button to add the desired
options.
O Press and hold the MY CYCLE button.
To recall a CUSTOM CYCLE:
O Press the POWER button to turn on the washer.
O ressthe MY CYCLEbutton. The stored settings will be
displayed.
O Press the START/PAUSE button to start the cycle.
NOTE: MY CYCLE can be adjusted the same as any
other cycle. However, once any other button is pressed,
the MY CYCLE button LED will turn off indicating that
the settings are no longer those of your saved cycle.
SOAK
Soak This option provides a 30 minute presoak
prior to the start of the selected cycle.
Use the SOAK option to presoak garments to help re-
move difficult spots or stains on fabrics. At the end of the
presoak time, the selected cycle will begin with the same
water used for the soak.
DELAY WASH
@ Once you have selected the cycle and
Delay other settings, press this button to delay
Wash the start of the wash cycle. Each press of
the button increases the delay time by
one hour, for up to 19 hours. Once the
desired delay time is set, press the START/PAUSE button
to start the delay time.
NOTE: If the START/PAUSE button is not pressed to
begin the delay time, the washer will automatically shut
off after four minutes.
RINSE & SPIN
Rinse&Spin Select this option to rinse and spin a load
separately from a regular cycle. This can
be helpful in preventing fresh stains from setting in
fabrics. You can change the spin speed by pressing the
SPIN SPEED button
O Press the START/PAUSE button to turn on the
washer.
O Press the RINSE & SPIN button.
O Press the SPIN SPEED button to select the desired
spin speed. Selecting NO SPIN is not allowed.
O Press the START/PAUSE button.
CONTROL LOCI(
_ Use this option to disable the controls. The
Soil washer can only be locked during a cycle.
Level / This feature can prevent children from chang-
*Cootrol Lock ing cycles or operating the machine. Once
the control lock is set, it must be deactivated
before any controls, except the power button, can be used.
Once the washer has shut off, the power button will allow
the machine to be turned ON, but the controls will still be
locked. When the controls are locked, '-' ._,_will display
alternately with the estimated time remaining. Pressand
hold the SOIL LEVEL button for five seconds to activate or
deactivate CONTROL LOCI(.
SPECIAL DRAIN FEATURE
This washer is equipped with a special feature that is
designed to make your washer as safe as possible.
If the washer is paused or shut off while there is still water
in the tub, the water will drain after several minutes. This
helps keep children safe by reducing the possibility of
water remaining in the tub. The washer can be restarted
any time before the drain begins.
If no action is taken, the dr" error code will display and
the water will drain from the tub. Once the washer begins
draining the water, the controls are disabled and the
drain process cannot be interrupted. Once the water is
completely drained, the washer will shut off.
NOTE: In the unlikely event that the washer experiences
a problem that causes an error code to be displayed, the
washer will still drain after several minutes. However, only
the original error code will be displayed.
22