Kenmore 796.31412310 Use & Care Manual page 21

I
OPTION BUTTONS
Your washing machine features several additional cycle
options that customize cycles to meet your individual needs.
O TurnON the washer and the Cycle Button repeatedly
press
until the desired cycle is selected. If the cycle selection is
changed after the options have been selected, all settings
will be changed to the default settings for the new cycle.
O se the cycle modifier buttons to adjust the settings for that
cycle.
O ressthe cycle option button(s) for the option(s) you would
like to add. The button will light when that option is se-
lected. If the selected option is not allowed for the selected
cycle, the chime will sound twice to inform alert you and
the LEDwill not illuminate.
O Pressthe START/PAUSEbutton to start the cycle. After a
brief delay, the lid will lock and the cycle will begin.
NOTE=
• To protect your garments, not every option is available
with every cycle.
• If the START/PAUSE button is not pressed within four
minutes to start the cycle, the control will shut off and all
settings will be lost.
ACCELA WASH
Adding this option reduces the cycle time while
still providing similar wash performance to the
same cycle without ACCELA WASH.
EXTRA RINSE
This option will add an extra rinse to the
selected cycle. Use this option to help ensure
the removal of detergent or bleach residue
from fabrics. Liquid fabric softener, if used, is
always dispensed in the final rinse. Press and hold the
ACCELA WASH button for 3 seconds to activate EXTRA
RINSE.
NOTE: You cannot select the EXTRA RINSE option with
the RINSE & SPIN cycle.
WATER PLUS
i ÷ Use this option if you wish to add more
Water water to your wash load. This option is
Plus especially useful for large or bulky loads.
ADD GARMENTS
Add Oa_melr_s T he ADD GARMENTS light will illuminate
during the early stage of the wash cycle
to indicate that it is safe to pause the cycle to add
more items.
Once the ADD GARMENTS light goes out, additional
laundry should not be added to the load. Doing so
may result in unsatisfactory performance because
the washer will not compensate for the additional
garments.
O Press the START/PAUSE button to pause the washer.
O Open the lid after it unlocks.
O Add your additional items.
O Close the lid.
O Press the START/PAUSE button. The cycle will
resume after the lid locks.
ECO WASH
® 1 This option saves energy by using cooler
Eco J water while increasing the wash and rinse
Wash times to maintain wash performance. This
*Chime On j Off
feature is only available with the NORMAL
and HEAVY DUTY cycles. In the NORMAL cycle, Hot
becomes Cold, and Cold becomes Tap Cold. In the
HEAVY DUTY cycle, Hot becomes Cold.
CHIME
÷ 1 Press and hold the ECO WASH button for
Eco J three seconds to adjust the volume of the
Wash signal. Press repeatedly to adjust the
*Ch_mooolo_ volume of the chime. The chime will sound
at the new volume with each press of the button. When
no chime is heard, the chime is off. The volume settings
are LOW - HIGH - OFF.
The chime volume can be adjusted at any time as long as
the washer is turned ON.
FABRIC SOFTENER
i ® ] Fabric softener is dispensed in the final
Fabric ] rinse. This washer is designed to save
Softener rinse water by using a jet spray rinse
system (SMARTRINSE) in NORMAL and
HEAVY DUTY cycles. Press the FABRIC SOFTENER
button to change the final rinse from spray rinse to
regular rinse so that the fabric softener is most
effective.
NOTE: Select the FABRIC SOFTENER option or
EXTRA RINSE option if liquid fabric softener is used
in NORMAL and HEAVY DUTY cycles. Failure to
select one of these options will greatly reduce the
effectiveness of the softener.
21