How Do I Clean The Flues On My Stove - Bosca Limit 350 Owner's Manual

OWNER'S MANUAL
We recommend the flues of your stove be cleaned by an Authorized Technical Service. If this
is not possible for any reason, you can clean the flues yourself by following the instructions
indicated below. The tools you will need are a ladder, a screwdriver and a steel brush. After
cleaning the flue, check the state of the seal between the flues and the sheet. If necessary, we
recommend you reseal with SikaflexR 11FC or a similar product.
How do I clean the flues of my stove?
Your stove is installed in such a way that the flues can be cleaned without uninstalling the unit.
1. Make sure the stove and the flues are both
cold before touching them. We recommend
your always protect your hands by using
safety gloves.
2. Unscrew the cap and remove it.
IMPORTANT
Bosca stoves contain a baffle that must be dismounted in order
to clean the unit.
3. Remove the anchoring screws to dismount
the baffle of your stove. We recommend
you carefully read the instructions that
correspond to your model and that are
included with this manual.
Oxigenating
Tube
Baffle
Support
Baffle
Anchoring
Screws
LATERAL VIEW
- 7 -
4. It is not necessary to totally remove the
baffle from the stove once it is dismounted
in order to clean the flues.
5. Slide the ball inside the upper side of the
flue all the way down until it appears inside
the stove.
6. Pull the rope inside the stove so that the
steel brush moves up the flue. Repeat this
operation 6 times. Do not use regular steel
wool instead of a steel brush.
Keep the door as closed as possible to avoid
soot being dispersed outside the stove.