Maintenance; Chamfering; Sharpening The Planer Blades (Optional Accessory) - Makita N1900B Instruction Manual

82 mm (3 - 1/4”) power planer

Hide thumbs Also See for N1900B:

Table of Contents

1. "V" groove

MAINTENANCE

1. Sharpening holder

You may wish to add to the length of the fence by attaching

002584

an extra piece of wood. Convenient holes are provided in the

fence for this purpose, and also for attaching an extension

guide (optional accessory).

003634

To make a chamfering cut as shown in the figure, align the

"V" groove in the front base with the edge of the workpiece

and plane it.

003634

CAUTION:

•

Always be sure that the tool is switched off and

unplugged before attempting to perform inspection or

maintenance.

Always keep your blades sharp for the best performance

002588

possible. Use the sharpening holder (optional accessory) to

remove nicks and produce a fine edge.

Table of Contents

Show Quick Links

Table of Contents