Advertisement
Care and Cleaning
Removing
and
Replacing
the Oven
Door
The door is heavy.
For safe, temporary
storage,
lay the door
flat with the inside of the door facing
down.
To remove
the oven
door:
1.
Open
oven door completely,
horizontal
with floor
(See
Figure 42).
2.
Pull the door
hinge locks on both
left and right
door hinges
down from the oven frame
completely
toward
the oven
door (See Figure 43). A tool such as a small flat-blade
screwdriver
may be required.
3.
Firmly grasp
both sides of oven door along
the door sides.
Do not use the oven door
handle
(See Figure 44).
4.
Close the door to approximately
10 degrees
from the oven
door frame.
5.
Lift the oven door hinge arms over the roller
pins located
on
each side of the oven frame
(See Figure 44).
To replace
oven
door.-
1.
Firmly grasp
both sides of oven door along
the door sides.
Do not use the oven door
handle
(See Figure 44).
2.
Holding
the oven door at the same angle
as the removal
position
(See Figure 44), seat the hook of the hinge arm
over the roller
pins located
on each side of the oven door
frame
(See Figure 45). The hook of the hinge arms must be
fully
seated onto the roller pins.
3.
Fully open the oven door, horizontal
with floor
(See
Figure 42).
4.
Push the door hinge locks up toward
and into the oven
frame
on both
left and right oven door hinges to the locked
position
(Figure
43).
5.
Close the oven door.
Special
Door Care Instructions:
•
Most oven doors contain
glass that can break.
•
Do not close the oven door
until all the oven racks are fully
in place.
•
Do not hit the glass with
pots, pans, or any other object.
•
Scratching,
hitting,
jarring,
or stressing the glass may
weaken
its structure
causing
an increased
risk of breakage
at a later time.
Oven door
hinge
locations
Figure 42:
Door hinge
location
Figure 43:
Door hinge locks
Figure 44:
oven
door -
B
hinge
fJ
Holding
door for removal
roller
pin
hinge
arm
l/
Figure 45:
Location
of hinge arm and roller
pin
29
Advertisement
