Blackstar HT-REVERB Owner's Manual

Blackstar HT-REVERB Owner's Manual

Valve reverb
Hide thumbs Also See for HT-REVERB:

Advertisement

Quick Links

HT-REVERB
VALVE REVERB
Owner's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HT-REVERB and is the answer not in the manual?

Questions and answers

Summary of Contents for Blackstar HT-REVERB

  • Page 1 HT-REVERB VALVE REVERB Owner’s Manual...
  • Page 2 Warning! Introduction Important safety information! Thank you for purchasing this Blackstar HT-REVERB valve effects pedal. Like all our products, this pedal is the result of countless Read the following information carefully. Save all hours of painstaking Research and Development by our world- instructions for future reference.
  • Page 3 A gated reverb that is triggered by the guitarist’s pick attack. The features on the HT-REVERB have been selected to be particularly suited to live performance and that is why we have included the Short/Long feature to allow the adjustment of reverb 2.
  • Page 4 This is the main output in a mono set-up or the left hand signal for side chain, the Dwell control affects the amount of valve use in a stereo set-up. If using the HT-REVERB in the effects loop compression and harmonics present in the effect. At low levels...
  • Page 5 15. DC Inlet Input Impedance: 1MOhm For the input of the 22V DC / 1.1A adapter supplied. Always use Output Impedance: <1kOhm a Blackstar approved adapter. Nominal Operating Level: -10dBV Dimensions (mm): 160 X 119 X80 Weight: 1.3kg DC Adapter: ADA Series Supplied...

Table of Contents