Blackstar LT-METAL - Pedal Manual

Features

The LT METAL is designed to deliver the aggressive high gain tones that modern guitarists need. It features Blackstar's patented ISF (Infinite Shape Feature) circuit, giving you infinite adjustment over the characteristics of the tone control network and taking you from the USA to the UK and anywhere in between.

Now, for the first time, you can effectively design your own tone and finally find 'the sound in your head'.

Controls

1. Gain
   The Gain control adjusts the amount of distortion that the pedal will deliver. As the Gain control is increased clockwise (CW) the sound will become more distorted until, at its maximum position, an extreme metal lead tone is arrived at.
2. Level
   The Level control sets the overall level or volume. It should be used in conjunction with the Gain control to achieve the exact type of drive you require. Generally speaking, to achieve the correct balance, at lower Gain settings the Level will be increased and at higher Gain settings the Level should be decreased.
3. Tone
   The Tone control allows exact adjustment of the treble frequencies within the sound. At low settings, counter clockwise (CCW), the sound will be warm and darker in character. As the control is increased clockwise (CW) the sound will become brighter. At the maximum settings the tone will be aggressive and cutting.
4. ISF
   The ISF control works in conjunction with the Tone control. It allows you to choose the exact tone signature you prefer. Fully CCW is a more American characteristic with a tight bottom end and more aggressive middle, and fully CW is a British characteristic which is more 'woody' and less aggressive.
   See illustration below.
   

We recommend that to start with the ISF is set to half way and the Tone control set to taste. Then try gradually adjusting the ISF CW and CCW until you find the sound you prefer.

5. Effect On/Off Switch
   Press this switch to turn the effect on or off.
6. Effect On/Off LED
   When the LED is on the pedal is on. When the LED is not on the pedal is off.
7. Input
   Plug your guitar in here. Always use a good quality screened guitar lead. To maximise battery life unplug your cable from the pedal when not in use.
8. Output
   This output is for connection to the input of your amplifier or into other pedals or effects. For best noise performance we recommend you place the LT METAL pedal first in the effects chain. Always use a good quality screened guitar lead.
9. DC Inlet
   For the input of a 9V DC adapter. Always use a Blackstar approved 9V adapter.
10. Battery Compartment
    Insert a 9V PP3 battery here. When the Effect On/Off LED begins to glow less brightly you should change the battery.

Technical Specification

Power: 9V DC / PP3 Battery
Maximum Current Draw: < 20mA
Controls: Gain, Level, Tone, ISF
Switches: On/Off Switch
Indicators: Effect On/Off LED
Jacks: Input, Output
Dimensions (mm): 60 x 54.5 x 122
Weight: 450g

Important safety information

Read the following information carefully. Save all instructions for future reference.
Do not open the equipment case. There are no user serviceable parts in this equipment. Refer all servicing to qualified service personnel.
Unauthorised modification of this equipment is expressly forbidden by Blackstar Amplification Limited.
Do not expose this apparatus to rain, liquids or moisture of any type.
Only use an approved Blackstar DC adapter. Unplug the DC adapter from the mains supply when not in use.

Blackstar Amplification Ltd, Beckett House, 14 Billing Road, Northampton, NN1 5AW, UK
For the latest information go to: www.blackstaramps.com
The specifications and information in this publication are subject to change without prior notice.

Documents / Resources

References

• Home Page Blackstar Amplification

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Blackstar LT-METAL - Pedal Manual