Makita AG090, AG125 Instruction Manual page 8

Thump
8
DO not point the ejection port at anyone in the vicinity. Keep
hands and feet away from the ejection port area.
When the air hose is connected, do not carry the tool with
your finger on the trigger or hand it to someone in this condi-
tion. Accidental firing can be extremely dangerous.
Handle the tool carefully as there is high pressure inside the
tool that can be dangerous if a crack is caused by rough han-
dling (dropping or striking). Do not attempt to carve or
engrave on the tool.
Stop nailing operations immediately if you notice something
wrong or out of the ordinary with the tool.
Always disconnect the air hose and remove the nail:
1. When unattended.
2. Before performing any maintenance or repair.
3. Before cleaning a jam.
4. Before moving the tool to a new location.