Basic Settings - Planar ContentSmart MP70 User Manual

2.2

Basic Settings

Planar ContentSmart MP70 User Manual
After boot-up completes, player will stay in Basic settings menu if no content service has been
configured (i.e. first boot-up for brand new unit or after a factory reset).
Note: If you have already sent content to the player, content will play back
automatically after 15 seconds after boot-up.
A USB mouse must be attached to the player to configure settings. If the display has a HID-
compliant touch screen, a USB mouse is not required and all the click action can be replaced by
tap actions.
Figure 2.2.1
Basic Settings:
Network
Time zone
Content
Each time the Basic settings menu is entered, playback will automatically begin after 15 seconds
if content services have been previously set. Auto playback can be canceled by clicking on the
button before the countdown ends.
User is able to enter Advanced Settings by clicking the Advanced button.
To enter the menu system at any time during playback, plug in a USB mouse and
hold the left mouse key in the corner area as shown below for 10 seconds. If the
player has touch screen, tapping and holding in the corner areas for 10 seconds
will also bring you to the menu.
Figure 2.2.2
Note: Player will ask for password if password has been configured.
8