Configuring The Player; System Connections; Figure 2.1.1 - Planar ContentSmart MP70 User Manual

2.1

System Connections

Planar ContentSmart MP70 User Manual
Connect to a monitor via an HDMI cable.
When using an HDMI connection, audio is sent along with video over the HDMI cable,
so no additional cables are required.
Attach the AC power adapter to power on the unit. After approximately 15 seconds, the booting
animation will be displayed on screen as shown below:
The boot-up process takes approximately 40 seconds to complete.
2

Configuring the Player

Figure 2.1.1

Figure 1.1.2
7