Content Configuration - Appstart - Planar ContentSmart MP70 User Manual

2.7 Content Configuration – AppStart
Planar ContentSmart MP70 User Manual
Figure 2.6.2
Users can assign the URL and APP for execution right after the system starts up.
1
Click the Advanced button. (Figure 2.6.1)
2
Click on Content, then click on AppStart.
3
Enter the valid URL of HTML/SMIL in AppStart (Figure 2.7.1). If you already
configured SMIL/HTML5 content URL via "Set content" (Figure 2.5.2), the URL
would be showed here.
4
The Advanced option is used for 3rd-party App configuration only.
19