Vax VPW2B Seies Manual page 9

IMPORTANT: Always make sure the machine is switched off and the safety button on the trigger
handle is LOCKED before connecting/disconnecting the lance, nozzle or accessories.
IMPORTANT: Lance and Nozzle must be attached to the hose for pressurised water to be produced
Using your accessories
(Jet nozzle orange nib)
The jet nozzle has a wider spray and is ideal for use on surface areas such as cars, garden furniture, decking and boats.
To attach the jet nozzle. Fit the lance
with a firm push and twist clockwise
to lock into place.
(Turbo nozzle black nib)
The turbo nozzle has a more concentrated spray and is ideal for use on very dirty surfaces, patios and masonry.
As it is not fitted with a pressure regulator, it is not suitable for use on delicate or painted surfaces.
To attach the turbo nozzle, fit the
lance with a firm push and twist
clockwise to lock into place.
Squeeze the trigger on the trigger handle to release a high pressured
water jet, and start cleaning.
Using your machine
Hold down the release button
on the lance, push the jet nozzle
and lance firmly together until
you hear an audible CLICK.
Release the button and gently
pull the jet nozzle to make sure
it is locked securely before use.
Hold down the release button
on the lance, push the turbo nozzle
and lance firmly together until you
hear an audible CLICK. Release
the button and gently pull the
turbo nozzle to make sure
it is locked securely before use.
Switch the pressure washer
on and squeeze the trigger handle
to release a high pressured jet
and start cleaning.
After connecting
pressure hose,
lance and accessories
check they are securely
fitted and locked in
place before
turning on.