Overheating protection
Tip-over safety protection
The heater has a security system that in the cases described
below will automatically shutdown.
When the unit is overheating and automatically be switched
back on.
The heater has a Kippsicherungs- switch that the device is
already at an inclination angle of 40 + / - 10 ° tilt or turn off
automatically at a push.
After you have brought the unit back to its vertical position,
it can be turned on again.
WARNING! Do not cover!
In order to avoid overheating. do not cover the heater.
WARNING!
If you notice a defect several times, unplug the power cord
from the wall outlet and proceed in accordance with section
"Troubleshooting" in the following chapter.
Security systems
35