Casio EX-S3 Service Manual page 5

USB Cradle (CA-22)
Special AC Adaptor
(Inlet Type)
Special AC Adaptor
(Plug-in Type)
Power Supply
• Use only the special NP-20 rechargeable lithium ion battery to power this camera. Use of any other type of battery is not
supported.
• This camera does not have a separate battery for the clock. The date and time settings of the camera are cleared whenever
power is totally cut off (from both the battery and USB cradle). Be sure to reconfigure these settings after power is interrupted.
LCD Panel
• The LCD panel is a product of the latest LCD manufacturing technology that provides a pixel yield of 99.99%. This means that
less than 0.01% of the total pixels are defective (they do not turn on or always remain turned on).
Options
Mobile charger (with AC adaptor)
Cradle (with AC adaptor)
Soft case
Neck strap
* Refer to the sales section for the details of the options.
Input/Output Terminals Camera connector; USB port; AC adaptor terminal (DC IN 5.3V)
Power Consumption DC 5.3V Approximately 3.4W
Dimensions 109(W) x 38.5(H) x 57(D) mm
(4.3˝(W) x 1.5˝(H) x 2.2˝(D))
(excluding projections)
Weight Approximately 61 g (2.1 oz)
Power Requirement 100 to 240V AC, 50/60Hz, 0.12A
Output 5.3V DC, 1.0A
Dimensions 48(W) x 28(H) x 66(D) mm
(1.9"(W) x 1.1"(H) x 2.6"(D))
(excluding projections and cable)
Weight Approximately 120 g (4.2 oz)
Power Requirement 100 to 240V AC, 50/60Hz, 0.12A
Output 5.3V DC, 1.0A
Dimensions 47(W) x 20(H) x 72(D) mm
(1.9"(W) x 0.8"(H) x 2.8"(D))
(excluding projections and cable)
Weight Approximately 110 g (3.9 oz)
BC-10L
CA-22
ESC-30
ESC-31
ENS-1
— 3 —