Table of Contents
Advertisement
CH1/M
I
O N O
N P U T
This ¼" input receives CH1 when recording two channels. When nothing is connected to the CH2 Input, CH1
is routed to both CH1 and CH2 of the headphone mix as a MONO input.
CH2 I
N P U T
This ¼" input receives CH2 when recording two channels.
S
I
E L E C T I O N
N D I C AT O R
Each LED in this group of 4 indicates a possible selection for the Rotary Knob, and has an adjacent label
printed to the left of each LED. Only 1 LED will ever be illuminated at a time. The LEDs correspond (from top
to bottom) to the following Volume control selections: STEREO, CH1, CH2, CH1+2.
S
B
E L E C T
U T T O N
This button selects which of the 4 Volume settings the Rotary Knob currently controls. This button also
selects the corresponding Selection Indicator LED to be illuminated.
The Volume setting does not change until the Rotary Knob is turned. This allows the user to "step through"
the other Volume settings by repeatedly pressing the Select Button.
R
B
E S O L U T I O N
U TTO N
This button toggles the Volume adjustment step size of the Rotary Knob between 3dB and ½dB.
V
D
O L U M E
I S P L AY
This 3 digit display reads out the relative Volume level (dB) of the current selection. The minimum level is
"00.0" and the signal is Muted. The maximum level is "66.0".
R
E
O T A RY
N C OD E R
Rotation of the Rotary Knob adjusts the Volume of the selected signal in the Headphone Cue mix, as
indicated by the Volume Display. Clockwise rotation increases the selected Volume, and Counterclockwise
rotation decreases the selected Volume. The size of the Volume adjustment of a rotational step is controlled
by the Resolution Button.
LK-Solo Volume settings do not affect the recorded signal. They only control the headphone cue mix.
Once the Volume reaches the top or bottom of the range, the knob may continue to be turned, but no
further Volume adjustments are made.
LED
S
V
C
O L U M E
O NT R OL
K
N O B
7
The Front Panel
Advertisement
Table of Contents
