Table of Contents
Advertisement
The LK-Solo inputs accept both "+4" professional line level and
"-10" (consumer) line level signals. Inputs may be either balanced or unbalanced.
When an input signal is not in use, it is advisable to mute the Volume for that signal to prevent additional
noise from entering the headphone mix.
With the exception of the Headphone output, each of the outputs of the LK-Solo is hard-wired to an input.
As such, the output signals are identical to their respective input signals. Therefore, the levels are un-
attenuated, and the balance/unbalanced wiring of the output cables should be the same as that of their
respective input cables.
The headphone output is designed for a maximum output level of +18 dBu. An appropriate adapter can be
used to connect headphones with a 1/8" (mini) plug.
The unit automatically adjusts to power inputs in the range of 83-265VAC, 47-63Hertz. No change of settings
is necessary.
Dimensions: 8"W x 1.75"H x 10.75" D (front panel to rear panel connectors; front panel knob adds 5/8")
An optional Rack Mount Kit is available which can be used to mount any combination of two LavryBlack
1/2 rack units in a 1U 19" rack space. Please note that this kit cannot be used to rack mount a single LK-
Solo. Weight: Unit ~5lbs.
Shipping weight: ~6 lbs.
Specifications
13
Specifications
Advertisement
Table of Contents
