Controls - NEC MultiSync EA193Mi User Manual

Controls

OSD (On-Screen Display) control buttons on the front of the monitor
function are as follows:
To access OSD menu, press any of the control buttons (MENU, Left, Right, Down, Up).
To change signal input, press the SELECT button.
To change ECO MODE, press the RESET/ECO MODE button.
NOTE: Exit OSD in order to change signal input.
Button
1 Ambibright Sensor
2 MENU
3 4-Direction-Key Left/Right
Up
Left Right
Down
Down/Up
4 SELECT
5 RESET/ECO MODE
6 Power
* When HOT KEY function is OFF, this function is disabled.
ECO TOOLS
BRIGHTNESS
Adjusts the overall image and background screen brightness.
If ECO MODE is set to 1 or 2, a bar for CARBON FOOTPRINT will appear.
CONTRAST
Adjusts the overall image and background screen brightness by input signal level.
ECO MODE
Decreases the amount of power consumption by reducing the brightness level.
OFF: No function.
1 (ENERGY STAR SETTING): Sets brightness variable range from 0% to 80%.
This setting can adjust brightness to a range in which power is reduced to meet Energy Star measurement conditions.
2 (40% POWER SAVINGS): Sets brightness variable range from 0% to 40%.
This setting can adjust brightness to a range in which power is reduced by 40% compared to the maximum brightness
setting.
When this function is set to ON, a CARBON FOOTPRINT bar will appear alongside the brightness adjustment bar.
NOTE: This function is disabled when DV MODE is set for DYNAMIC.
This function is disabled when Color Control System is set to DICOM SIM.
Detects the level of ambient lighting, allowing the monitor to make adjustments to
various settings resulting in a more comfortable viewing experience. Do not cover this
sensor.
Accesses OSD menu. Exits the OSD sub menu. Exits OSD Control menu.
Navigates to the left or right through the OSD Control menu.
Moves the bar left/right to increase or decrease the adjustment.
You can adjust the BRIGHTNESS directly while the OSD menu is off*.
Enters the OSD menu if HOT KEY is set to OFF.
Navigates up or down through the OSD Control menu.
You can adjust the VOLUME directly when not in the OSD Control menu*.
Enters the OSD menu if HOT KEY is set to OFF.
Enters the OSD Control menu. Enters OSD sub menus.
Changes the input source when not in the OSD Control menu.
Resets the OSD back to factory settings in the OSD control menu.
Switches among ECO MODE settings.
Activates Auto Adjust function if pushed for 3 seconds while the OSD menu is off
(Analog input only)*.
Turns the monitor on and off.
English-11
Menu