Cleaning; When The Appliance Is Not In Use; How To Change The Bulb - Electrolux ERP 16510 Operating Instructions Manual

24 electrolux
In case of increased demand e.g.
during heatwaves, the refrigerator
temporarily happens
constantly - during this the automatic
defrosting is ineffective.
Remaining small ice and frost stains on
back plate of the cooling compartment
after defrosting period is not abnormal.

Cleaning

Never use metal objects for
cleaning your appliance as it
may get damaged.
NEVER use detergents, abrasive
powders, highly perfumed cleaning
products or wax polishes to clean the
interior as these will damage the
surface and leave a strong odour.nie
Metallgegenstände um das Gerät zu
reinigen, da es beschädigt werden
könnte.
Clean the inside with warm water and
bicarbonate of soda. Rinse and dry
thoroughly.
To guarantee a safe operation of the
fridge, once a year remove the ventilation
grill at the base and clean the air
channels with a vacuum cleaner.

When the appliance is not in use

Disconnect the appliance from the
electricity supply.
Empty all foods and clean the appliance,
leaving the doors ajar to prevent
unpleasant smells.
EN
to operate

How to change the bulb

Should the light fail to work you can
change it as below:
Break the circuit of the appliance.
Unscrew the plate screw fixing the lamp
cover, then take the lamp cover off in the
direction of arrow and the bulb can be
changed. (Type of the bulb: Mignon 322,
230 V, 15 W, E 14 thread)
After changing bulb replace the lamp
cover, screw the plate screw and apply
voltage to the appliance.
The lack of light does not influence
operation of the refrigerator.