Table of Contents
Advertisement
Step 3
NOTE: ENSURE OVEN BASE IS FACING THE CORRECT WAY BEFORE SET
DOWN.
We recommend that anyone lifting the oven is adequately trained in lifting
techniques. Ensure all fingers and clothing are kept clear from beneath the oven base
and between oven dome and base joint.
NOTE: Oven dome and Base is fragile handle with extreme care when moving to
prevent slight chipping.
Carefully place the oven base in two parts on your level pre constructed base or
framework, lay the front of the ovens base first, followed by the rear of the ovens
base which slots onto the front, as shown below.
Tongue and groove base
Two parts slot together
Form your solid base, with the
Carefully place ovens dome within
recess left for the ovens dome
the recess of the base
© The Stone Bake Oven Company 2010. All rights reserved.
Advertisement
Table of Contents
