Operation; Getting Started; Counting - Scan Coin SC 1500 User Manual

Operation

WARNING!
Risk of jamming! Follow the Safety precautions.

Getting started

1) Connect the mains supply cable to
the mains socket at the rear of the
machine.
2) Set the power switch to I (On
position).
3) The machine will initiate a start and
load all start-up parameters. If any error occurs, an error code is
displayed.
4) The machine is automatically set to
Batch counting mode. "0" will
appear on the count display and
"100" will appear on the batch
display.
5) Any function can now be selected, see

Counting

The machine counts the notes currently placed on the feed table. At
the start of the new counting operation, the count display is
automatically reset to zero.
1) Press C to clear the batch number and disable batch counting
mode (default mode).
2) Place the notes on the feed table. Adjust the guides so that they
fit the size of the notes. The counting starts automatically.
SC 1500 - Doc. No. 018522-000/03-025
"Functions" on page
Operation
S
7.
11
GB