Headphone Overview; Power On/Off; Active Noise Canceling; Play/Pause Music - Plantronics BackBeat PRO User Manual

Headphone overview

Power on/off

Active Noise Canceling

Play/pause music

Volume

Track selection

OpenMic

Voice dial (phone feature)

Answer or end a call

Decline a call

Mute/unmute

Call back last call

Pairing mode

Be safe

L
ANC
Slide the switch to power on or off.
Slide the switch to activate or deactivate ANC to block out unwanted noise.
Tap the Play/pause button
Rotate the volume wheel
Rotate the track wheel forward
Hear your surroundings by tapping the Mic button when not on a call.
If your smartphone has a voice-enabled assistant, press the call button
for phone prompt.
Tap the Call button on the right ear cup.
Press and hold the Call button for 2 seconds.
While on an active call, choose:
• Tap the Mic button
• Take off/put on your headset while on an active call (requires active smart sensors)
Double-tap the Call button
With your headphones powered on, press and hold the Call button
the LEDs flash red and blue.
Please read the safety guide for important safety, charging, battery and regulatory information
before using your new headset.
R
on the left ear cup to play or pause music.
forward (+) or backward (–) to control the volume.
or backward to control the track selection.
.
for 3 seconds and wait
until you hear "pairing" and
4