Contents Pair Get Paired Pair second device Pair to Mac Charge and fit Charge The basics Headset overview Power on/off Play/pause music Track selection Activate voice assistant Make/Take/End Calls Mute Find your headset Support...
Pair Get Paired The first time you power on your headphones, the pairing process begins. Slide the power switch on. You hear "pairing" and the LEDs flash red and blue. Activate Bluetooth on your phone and set it to search for new devices. ®...
Charge and fit Charge It takes up to 2.5 hours to fully charge your headphones. The LEDs turn off once charging is complete. To check the headphones battery status, tap the Call button while wearing your headphones. Headphones must be in idle state. Your headphones have up to 18 hours of listening time.
The basics Headset overview Mute/unmute Volume up Volume down Play/pause music Track forward Track backward Bluetooth pair button Power on/off Call button Be safe Please read the safety guide for important safety, charging, battery and regulatory information before using your new headset. Power on/off Slide the switch to power on or off.
Most headsets are found under car seats, in pockets or on a messy desk. For less obvious locations, locate your headset by sending a tone to find it. Download the Plantronics Hub app for iOS and Android by visiting plantronics.com/software. Locate your lost headset by using Find MyHeadset within the Plantronics Hub app.
2017 Plantronics, Inc. BackBeat and Plantronics are trademarks of Plantronics, Inc. registered in the US and other countries, and Plantronics Hub is a trademark of Plantronics, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under license. All other trademarks are the property of their respective owners.