Hercules DJControlWave Getting Started page 4

1. CONNECTING THE HERCULES DJCONTROLWAVE TO
YOUR IPAD
1.1. Enabling the Bluetooth® function on your iPad
On your iPad, open the Settings panel and make sure that the Bluetooth®
function is enabled.
1.2. Pairing the Hercules DJControlWave with your iPad
- Set the battery on/off switch
(located on the underside of the
Hercules DJControlWave) to the ON
position.
If the LED does not flash, press and hold the
seconds.
On the iPad, the Hercules DJControlWave appears in the list of available
Bluetooth® devices.
- Press the power button
put the product in pairing mode.
The LED flashes in blue.
3/12
to
button for 3