WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years old. mBot is an educational robot kit for beginners to get hands-on experience about graphical programming, electronics, and robotics. It is an all-in-one solution for robotics learning and designed for STEM education.
Part List mCore DC Power Jack 2-pin connector for lithium battery Bluetooth/2.4G module USB cable mCore Screw M4×8 Reset 6P6C RJ25 Cable Screw driver USB Type-B Connector Power switch Motor Port Battery Holder ( 4 x AA batteries ,not included ) Velcro Motor R Chassis...
Wiring Battery Holder ×1 Velcro ×1 AA battery holder Bluetooth/2.4G module Me Ultrasonic Sensor Lithium batter y (Not included) Motor Screw M4×8 ×4 mCore ×1 Motor Me Line Follower Bluetooth/2.4G module ×1 Motor Motor You may need to switch the order of two wires(M1, M2) to correct the rotation direction...
Users can use buttons to control the control is not included . standard 2-pin JST-PH connector. Support on-board charge via USB cable. direction and speed of mBot. Forward Mode 2: Wall avoidance robot A robot that can avoid walls and obstacles...
Scratch, mBlock enables users to read sensors, control motors and even the whole robot with ease. Download: http://mblock.cc/download/ Get started with mBlock to program the mBot: http://learn.makeblock.cc/mbot/ More detailed tutorials: More detailed tutorials: http://learn.makeblock.cc/mbot/...
RGB within 19.7 feet (6 LEDs, or others. meters) Me Joystick is normally used to See More on Makeblock Platform More detailed tutorials: control the moving direction of object. http://learn.makeblock.cc/mbot/...