ABB -free home System Manual page 22

®
04 Commissioning ABB-free@home
Creating the house structure (Fig. 16)
The first step of the configuration is the creation of the
house structure.
Here a digital image of the apartment or the house with all
its floors and rooms is created.
This information is used during the next step to allocate
the devices available in the house to a function and to
their mounting position.
After commissioning has been completed the floor plan
here created is also used for the visualization of the instal-
lation and as orientation for the switchable loads.
If devices are also to be switched outdoors, e.g. lights on
the terrace or in the garden, you should create a "Terrace"
or "Garden" room, to be able to position the devices there.
22 │ System Manual