ABB -free home System Manual page 10

03 Planning and Installation
Planning of the System Access Point
The System Access Point makes available its own WLAN
during commissioning, so that it can be comfortably pro-
grammed in mobile mode, even when no network infra-
structure is available.
However, in the final state the System Access Point
should be set up as participant within the available net-
work infrastructure.
The System Access Point can be connected to the availa-
ble network infrastructure of the apartment either via the
installed Ethernet port or the installed WLAN antenna.
10 │
Connection via WLAN (Fig. 5)
If the System Access Point cannot be connected to the
Internet router via cable, it can be logged into the existing
WLAN network via WLAN as client.
Connection via patch cable (Fig. 6)
If the System Access Point and Internet router are in-
stalled side by side, they can be connected via a patch
cable.
Connection via installation cable in case of structured
cabling (Fig. 7)
If the System Access Point is to be connected via a CAT
installation cable, it can be connected via the RJ45 socket
with an LSA adapter.
ABB-free@home
System Manual
®