The motorcycle is equipped with a 5-speed mesh
transmission. The gear indicator shows the gear
position at present.
International 5-speed
I t i s f o r b i d d e n t o
gearshift up or down
when the throttle is
sitll not decreased
Fig. 17
and the clutch is in
REAR BRAKE PEDAL
(Fig. 18)
The rear brake will function and the
rear stop light will glow when
applying the pedal.
REAR SHOCK ABSORBER
(Fig. 19)
The rear shock absorber is located
on the middle of the frame. It is of
adjustable type for different loads
or riding conditions. To increase the
spring preload for a stiffer rear
suspension, turn the adjusting nut
in direction B, then tighten up the
lock nut. To decrease the spring
preload to suit light
9
LF125GY-5改.p65
loads and smooth road conditions, turn the adjusting nut in direction A, then
tight the lock nut.
SIDE STAND (Fig. 20)
When parking the motorcycle, turn the side stand clockwise as far as it will
go. Before riding, turn it to the initial position.
Fig. 16
Gearshift pedal
CAUTION
Non-cyclic 5-speed
Be sure to turn the side stand in the position B before driving the
I t i s f o r b i d d e n t o
motorcycle. Otherwise, it may fall over.
gearshift up or down
when the throttle is
sitll not decreased
and the clutch is in
Fig. 18
Rear brake
pedal
Adjusting nut
Rr. shock
absorber
Fig. 19
Lock nut
Fig. 20
2012-3-1, 10:29