Novo Nordisk NovoPen 3 Instruction Manual page 27

SECTION 5 (cont.)
If the dose indicator window
does not show zero, there were
not enough units of insulin in
the PenFill cartridge for you to
receive the full dose. The dose
indicator window shows the
number of units that you did not
receive.
For example, if you dial 25 units
and there are only 20 units left
in the PenFill cartridge, after
the injection the number in the
dose indicator window will be 5
(25-20 = 5).
To get the remaining part
of your dose:
a. Note the number of units in
the dose indicator window.
b. Remove the NovoFine needle
(see Section 6).
c. Remove the empty
PenFill 3 mL cartridge
(see Section 7).
d. Insert a new PenFill 3 mL
cartridge
(see Section 2).
e. Attach a NovoFine needle
(see Section 3).
f. Do an air shot
(see Section 4).
g. Dial the number of units
noted in step a.
h. Give the injection.
23