Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Swann SC11052
Summary of Contents for Swann SC11052
- Page 1 VACUUM CLEANER SC11052 USER INSTRUCTIONS...
- Page 2 Valid only if purchased from the SDHS Group Technical Specification: Power supply: 220V-240V AC. 50Hz Power Consumption: 1600 W Max Model number: SC11052 Protection: Class II SDHS Group L70 1AB Box MPRC8 Swan Vacuum Helpline. Please Call 01733 404703 Swan Vacuum Spare Parts. Please Call 01733 404709...
-
Page 3: Safety Alerts
IMPORTANT SAFETY INSTRUCTIONS READ THIS SECTION TO BE AWARE OF THE RISK OF PERSONAL INJURY, DAMAGE TO PROPERTY, ELECTRIC SHOCK & FIRE. 1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety. -
Page 4: Electrical Safety
Electrical Safety Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This product is designed to operate on 220 – 240V AC, 50Hz. Connection to any other power source may damage the unit. This product may be fitted with a non –... - Page 5 Description: 9. Turbo brush Vacuum Parts Description 1. Extention Tube 6. Cable Rewind Button 2. Handle 7. Hose Inlet 3. Flexible Hose 8. Floor Brush 4. On / Off Switch 9. Turbo Brush 5. Power Slide Regulator...
-
Page 6: Assembly Instruction
ASSEMBLY INSTRUCTION: Always remove the plug from the power socket before fitting or removing accessories! 1. Fitting and removing the flexible hose. Fitting: Insert the flexible hose into the suction hole. Push until it clicks and locks into position. Removing: Press the button to release and pull the hose from the suction inlet. - Page 7 Floor head - ideal for the daily cleaning on carpets and hard floors. For use on hard floors ensure the floor head bristles are extended. Crevice tool - for radiators, corners, baseboards and between cushions. Soft brush and upholstery attachment – ideal for fabrics, picture frames and cleaning the sofa.
-
Page 8: Instructions For Use
**Before connecting to the power source, make sure the dust-bin; filter and accessories are fitted correctly. Do not operate without dust-bin or filters in place. 3. Press the ON/OFF power switch to start vacuuming. 4. The SC11052 vacuum has a sliding power regulator which allows easier suction control when vacuuming. - Page 9 Thermal cut out: This vacuum is fitted with a thermal cut out device, which protects the vacuum if the motor should overheat. If the cleaner suddenly stops, please check the following: a. Switch off the cleaner and unplug from the power supply. b.
-
Page 10: Maintenance
MAINTENANCE Removing rubbish from the dust-bin Always unplug the vacuum before any maintenance. Always operate the cleaner with the dust-bin installed. The dust-bin must be emptied each time the dust full indicator turns red, whilst the vacuum is operating at maximum power and the nozzle is raised from the floor. - Page 11 Open the dust-bin trap door and empty the rubbish. 5. Whilst emptying the dust-bin, check the dust cone is clear. The dust cone can be accessed when the dust-bin trap door is open. Grip the dust cone at its base and twist anti-clockwise to remove. Brush clean and replace. Please ensure when refitting, that it is located correctly and that it locks into position before closing the dust-bin trap door.
- Page 12 1. Take out the HEPA filter assembly. Hepa filter & bracket Foam filter 2. Rinse the Hepa filter and bracket in warm water and allow to dry completely before refitting. 3. Rinse the sponge filter in warm water and allow to dry completely before refitting.
- Page 13 Changing the Anti-microbial Exhaust filter 1. Unclip the exhaust filter cover, doing this will allow access to the filter. 2. With the filter cover removed take out the filter. 3. Replace the filter with a clean new one. 4. Close the cover. Exhaust filter cover Exhaust filter SWAN VACUUM HELP-LINE: PLEASE CALL 01733 404703...
-
Page 14: Spare Parts List
SC11051 /06 Turbo brush SC11050 /07 Dust cone (see page 10) SC11052 /51 Filter Kit SWAN VACUUM HELP-LINE: PLEASE CALL 01733 404703 SWAN VACUUM SPARE PARTS: PLEASE CALL 01733 404709 Calling from outside the UK Please Call - 00 44 1733 404703... -
Page 15: Waste Electrical Recycling
WASTE ELECTRICAL RECYCLING This symbol indicates that this product is classed as Electrical or Electronic Equipment and should not be disposed of with other household waste. The Waste Electrical and Electrical Equipment (WEEE) Directive has been introduced across the European Union: •...